Wood Surface Stain Decor Beitz 2.7l

<p>Water-soluble acrylic stain for interior use. Used for toning wood surfaces. Unlike paint, the natural structure of the wood remains visible. It is used for treating walls and ceilings, doors, floors, skirting boards, furniture elements and other wood surfaces indoors. To increase the wear resistance of surfaces, stained surfaces must be covered with wax or wood lacquer (Cabinet, Mööblilakk). Stained floors and stairs must be lacquered or waxed (Parketilakk, MarineLakk).</p><u>Properties:</u><ul><li>Absorbs well, highlighting the wood grain</li><li>Dries quickly</li><li>Color tone remains deep and rich</li><li>Maximum VOC content in ready-to-use product < 130 g/l</li><li>Color - colorless, tintable in the Eskarocolor system (WoodColor color chart)</li><li>Coverage 8 - 16 m²/l</li><li>Package volume 2.7 l</li></ul><u>Application:</u><p>The wood surface must be dry (moisture content below 20%) and free from grease, oil, wax, dust and other contaminants. Clean previously lacquered or painted surfaces. Lightly moisten a new wood surface with a stream of water, allow it to dry and sand the raised wood fibers (sandpaper no. 220 - 240). Remove sanding dust.</p><p>Before use, and occasionally during work, stir the stain thoroughly. It is recommended to mix all the tinted stain needed to cover all surfaces in one container. Apply 1 coat to the surface with a sponge, brush, roller or sprayer at a temperature of +10 to +28°C and relative humidity below 80%. To achieve a lighter shade, the stain should be diluted with water. A more saturated tone is obtained by applying a second coat to the already treated surface after it has dried. To avoid tone differences, we recommend applying the stain to the surface without interruption along the wood grain from edge to edge. When treating large plank surfaces, several planks must be painted simultaneously, use stain diluted with water (up to 1:1). Avoid applying thick layers and avoid over-brushing. After application, before it dries, wipe the stain with a cloth or sponge to leave the surface practically dry. Painting in direct sunlight, drafts, elevated temperatures or dusty environments may cause defects on the treated surface. To check the suitability of the color tone, it is recommended to perform a test on a separate small wood surface. The final color of the surface to be treated depends on the type of wood, the number of coats applied, the number of knots, and the chosen color. Before applying the next coat to the surface, it is recommended to sand the dried surface with fine sandpaper and carefully remove the sanding dust.</p><p>Maintenance of the treated surface depends on the lacquer or wax used to coat the painted surface. The surface can be gently cleaned 3 weeks after treatment using a soft, damp cloth. Do not use organic solvents, abrasive cleaning agents or rough sponges and brushes.</p><p>Drying time at least 6 hours at 20°C and 80% relative humidity before applying the second coat or lacquering.</p>

14.69 € EUR 12.29 € EUR (-16%)

SKU: 209633

Brand: Eskaro

EAN: 4740381014796

This product is available at Zum.lv - the largest online store in Latvia.

View product on site