Elvi Sub-Plaster Primer 3L Red

<p>Acrylic dispersion-based primer with quartz sand and an antiseptic additive. Contains adhesion-enhancing additives. Intended for interior and exterior use — for priming dense, low moisture-absorbing mineral surfaces (monolithic concrete and blocks, silicate bricks and blocks, ceramic bricks and blocks, etc.) before plastering, applying leveling and decorative thin-layer plaster, for priming ceramic tiles before bonding new tiles over old ones, as a moisture-insulating primer before bonding ceramic tiles to gypsum board, for priming floors (concrete, gypsum, wood, tile, etc.) before pouring self-leveling compounds, for priming oil and alkyd coatings before plastering, skimming, or bonding tiles and gypsum boards. The primer increases the adhesion of dense and non-absorbent surfaces to mineral plasters, fillers, and adhesives; is resistant to alkaline effects, water-resistant, vapor-permeable, and contains no organic solvents. Tinted red. Volume 3 l.</p><p><u>Surface preparation:</u><br>The surface to be treated must be dry, free of dust, oil, grease, and other adhesion-reducing contaminants. Peeling paint and surfaces that are not load-bearing must be removed mechanically. Application of primer to frozen surfaces is not permitted.</p><p><u>Surface treatment:</u><br>Before use, the primer must be thoroughly mixed. Apply to the surface with a brush or roller. The temperature of the substrate material and air must be between +10&deg;C and +25&deg;C. Drying time from 3 to 6 hours. Proceed with further work only after the primer has fully dried.</p> <p>Consumption depending on the surface: 0.20 - 0.25 kg/m².</p>

8.79 € EUR

SKU: 15021

Brand: Elvi

EAN: 4751001657156

This product is available at Zum.lv - the largest online store in Latvia.

View product on site