Grout Flexfuge Univ. 5kg Cement Grey

<p>Knauf Flexfuge Universal is a fast-setting, flexible, cement-based jointing mortar that provides water resistance and high durability. It is suitable for a wide range of applications both indoors and outdoors. Knauf Flexfuge Universal is intended for filling tile and slab joints on walls and floors – ceramic tiles, glass mosaic and natural stone, heated floor coverings, balconies, terraces and wet rooms, corridors, stairs and living areas. Do not use for expansion joints (fill with silicone, e.g. Knauf Sanitär Silikon). Avoid direct sunlight and draughts. Check mortar compatibility with natural stones.</p><u>Technical Data:</u><ul><li>Colour – cement grey</li><li>Type CG2WA (EN 13888)</li><li>Slaking time ~3 min.</li><li>Working time 30 – 60 min.</li><li>Can be walked on after ~3 h</li><li>Temperature resistance -20 °C to +80 °C</li><li>Consumption for tiles 10 x 10 cm with joint 3 x 8 mm ~0.80 kg/m², tiles 30 x 30 cm with joint 2 x 10 mm ~0.23 kg/m²</li><li>Packaging 5 kg</li></ul><u>Features and Benefits:</u><ul><li>Universally suitable for joints from 1 to 20 mm wide</li><li>Flexible and water-resistant, frost-resistant</li><li>Dirt-repellent ("pearl effect")</li><li>Good adhesion to tile edges</li><li>Suitable for heated floors and wet rooms</li><li>Wide range of colours, suitable for natural stone</li></ul><u>Instructions for Use:</u><p>Joints must be clean and dry. Moisten absorbent surfaces evenly. Mix the powder with cold water (1 kg to 0.27 – 0.29 l), stirring until a smooth consistency is achieved. Allow to slake for 3 minutes and stir again. Apply the mortar with a rubber float, removing excess material diagonally. After setting, smooth the joint with a sponge float. Remove residues from the surface with a slightly dampened sponge.</p>
15.19 € EUR
SKU: 230190
Brand: Knauf
EAN: 4006379104673

This product is available at Zum.lv - the largest online store in Latvia.

View product on site