Knauf Gypsum Plaster 16kg Rotband

<p>Knauf Rotband is an industrially prepared, single-coat plaster suitable for plastering concrete ceilings and walls. Flexible, vapour-permeable ("breathing"), impact-resistant. Designed for all types of interior spaces, including kitchens, bathrooms and other rooms with normal humidity levels. It has an easily formed smooth and firm surface. Regulates room climate and retards the spread of fire.</p><u>Technical Data:</u><ul> <li>Complies with standard LVS EN13279-1, B1/50/2</li> <li>Fire reaction class A1, non-combustible</li> <li>Grain size up to 1.2 mm</li> <li>Thermal conductivity λ 0.34 W/m·K</li> <li>Water vapour diffusion coefficient μ 10</li> <li>Plaster coat thickness from 5 mm to 50 mm</li> <li>Consumption 9 kg/m<sup>2</sup>/10 mm thick coat</li> <li>Shelf life 6 months from the date of manufacture</li> </ul><u>Properties and Application Area:</u><ul><li>Ensures high plaster quality</li><li>Can be applied in a single coat up to 50mm</li><li>Water vapour permeable</li><li>Mechanically durable</li><li>Retards the spread of fire</li><li>Regulates room climate</li><li>Ready-to-use dry mix</li><li>Economically advantageous</li><li>Can be worked by hand</li><li>Knauf Rotband is suitable for any room from basement to roof for plastering rough surfaces such as monolithic concrete panels, all types of blocks, and bricks.</li><li>Suitable for all rooms with normal humidity levels, including kitchens and bathrooms in residential buildings, schools, hotels and hospitals.</li><li>Textured surfaces can be created.</li><li>Suitable for surface quality Q1-Q3* – levelled surface, and Q1-Q4* – smooth surface. Q4* in combination with Knauf Multi Finish, Ready-Finish or with Knauf ready-to-use finishing compounds.</li><li>Used as a base for painting or wallpapering, tile adhesion, and final decorative plasters</li></ul><u>Instructions for Use:</u><p>The substrate must be dry, load-bearing, clean, free of dust, loose particles and efflorescence, water-permeable and frost-free. If the concrete surface is insufficiently absorbent and dense, treat it with Knauf Betonkontakt and allow it to dry. If the surface is too absorbent, treat it with Knauf Stuck-Primer.</p><p>Pour Rotband 30 kg into ~17 l of clean, cold water and mix with a slow-rotating mixer until a homogeneous, lump-free mass of suitable consistency is formed. Within 20 minutes of mixing, the material must be applied to the surface and levelled with a profile straightedge. After approximately 40 to 60 minutes (depending on the plaster substrate), precise levelling (cutting) of the surface is carried out with a trapezoidal straightedge until a slightly rough surface is obtained. After the plaster surface has dried, smooth it with a Swiss trowel. After moistening the plaster surface with a sponge, sufficient liquid creamy material is obtained to level out minor irregularities. After the plaster surface has dried, smooth it with a Swiss trowel, repeating the process if necessary. Plaster must be separated from adjacent structures with expansion joints: after plastering, make "trowel cuts" at right angles. To speed up drying of the plaster, ensure good ventilation. Working time is approximately 90 minutes. Air and substrate temperature during application and curing must be between +5°C and 30°C.</p>
8.99 € EUR
SKU: 18281
Brand: Knauf
EAN: 4750614005477

This product is available at Zum.lv - the largest online store in Latvia.

View product on site