Knauf Gypsum Plaster 30kg MP-75

<p>MP 75 is a single-coat wall and ceiling plaster designed for all types of interior spaces, including kitchens, bathrooms and other rooms with normal humidity levels. It has an easily formed smooth and firm surface. It regulates indoor climate, is water vapour permeable, and retards the spread of fire.</p><u>Technical Data:</u><ul><li>Complies with standard LVS EN13279-1, B1/50/2</li><li>Fire reaction class A1 according to EN 13501-1</li><li>Grain size up to 1.2 mm</li><li>Thermal conductivity λ 0.39 W/m·K</li><li>Water vapour diffusion coefficient μ 10</li><li>Plaster coat thickness from 8 mm to 50 mm</li><li>Consumption 10.5 kg/m<sup>2</sup>/10mm thick coat</li><li>Shelf life 6 months from date of manufacture</li></ul><u>Properties and Application:</u><ul><li>Flexible</li><li>Economical</li><li>Ensures high plaster quality</li><li>Can be applied in a single coat up to 50 mm</li><li>Water vapour permeable</li><li>Durable</li><li>Plaster surface can be smoothed</li><li>Retards the spread of fire</li><li>Regulates indoor climate</li><li>Knauf MP 75 is a gypsum plaster for walls and ceilings. Intended for interior use.</li><li>Suitable for plastering all types of rough surfaces – monolithic concrete panels, all types of blocks, and bricks.</li><li>Can be used in all rooms with normal humidity levels, including kitchens and bathrooms in residential buildings, etc.</li><li>Textured surfaces can be created.</li><li>Used as a base for painting or wallpapering, tile adhesion, and finishing decorative plasters.</li></ul><u>Instructions for Use:</u><p>The substrate must be dry, load-bearing, clean, free of dust, loose particles and efflorescence, water permeable, and frost-free. If the concrete surface is not sufficiently absorbent and is dense, treat it with Knauf Betokontakt and allow it to dry. If the surface is too absorbent, treat it with Knauf Stuck-Primer.</p><p>Liquid consistency (pressure in pipe approx. 1 bar/m) MP 75 is applied to the wall using a PFT machine, starting from top to bottom. Work interruptions must not exceed 10–15 minutes, otherwise the mixer, pump and hoses must be cleaned. To obtain a flat surface, level the applied material with a profile ruler. After approximately 80 to 100 minutes (depending on the plaster substrate), use a trapezoidal straightedge to perform precise levelling (cutting) of the surface until a slightly rough surface is achieved. After the plaster surface has dried, smooth it with a Swiss trowel. After moistening the plaster surface with a sponge, enough liquid creamy material is produced to level out minor irregularities. After the plaster surface has dried, smooth it with a Swiss trowel, repeating the process if necessary. The plaster must be separated from adjacent structures with expansion joints: after plastering, make "trowel cuts" at right angles. To speed up drying of the plaster, ensure good ventilation. Working time approximately 180 min. Air and substrate temperature during application and hardening must be between +5°C and 30°C.</p>
8.39 € EUR
SKU: 11386
Brand: Knauf
EAN: 4750614006238

This product is available at Zum.lv - the largest online store in Latvia.

View product on site