Knauf Super Finish 20kg Universal Filler

<p>Ready-to-use filler based on dolomite powder and vinyl binders with special additives for achieving exceptionally smooth and even surfaces. Can be applied by hand and with mechanical application equipment (e.g. Airless). Very low VOC (volatile organic compound) emissions, meaning the filler is not harmful to health during application or subsequent use.</p><u>Technical Data:</u><ul><li>Complies with standard LVS EN 13963</li><li>Type 3A fine filler compound</li><li>Air, substrate and material temperature must be above +10 °C during application and drying</li><li>Consumption ~ 1.5 kg/mm/m² for surface filling – Q3, Q4 quality</li><li>Drying time depends on the substrate absorption capacity, air temperature and humidity in the room. Drying time for a 2 mm thick layer ~24 h. When applying a "0 mm" layer, allow to dry for 3 - 4 h</li><li>Shelf life 12 months from the date of manufacture</li><li>Packaging 20 kg</li></ul><u>Properties and Application Area:</u><ul><li>Suitable for creating exceptionally smooth and even surfaces</li><li>Intended for interior use. Can be applied by hand, mechanically or with a paint roller in layers up to 2 mm thick</li><li>Intended for various types of surfaces with preparation level Q2-Q4</li><li>For interior use</li><li>Ready to use</li><li>Creamy consistency</li><li>Easy to apply and level</li><li>Good workability and adhesion to the substrate</li><li>Easy to sand and process</li><li>Provides an ideally suited surface for further finishing work</li><li>The finished surface is durable in use</li></ul><u>Instructions for Use:</u><p>All substrates must be load-bearing, dry and clean, free of dust and any other layers or particles that impair adhesion to the substrate. Large irregularities or substrate damage should be filled with a gypsum filler, such as Uniflott, Fugenfuller or Q Filler. Highly absorbent or unstable substrates should be primed with deep primer Tiefengrund. Gypsum board surfaces can only be filled if it is ensured that the board surfaces will not be affected by significant deformation as a result of temperature and humidity fluctuations. It is not necessary to prime gypsum board surfaces, but we recommend doing so with deep primer Tiefengrund.</p><p>The filler compound must be thoroughly stirred before use. If necessary, water may be added, but no more than 1 litre per 20 kg pail. Water should be added in small amounts, stirring each time to ensure the material is at the required consistency. Only clean tools and containers should be used. This filler compound can be applied by hand, with a paint roller or with an airless spray unit PFT SWING AIRLESS or equivalent. The filler is intended for thicknesses up to 2 mm. The next coat may be applied once the previous one is completely dry. Sanding is recommended within the first three days after the surface has dried. Drying time depends on ambient conditions and layer thickness. A 2 mm layer dries in approx. 24 hours, thin layers in approx. 3 - 4 hours. After sanding, the surface can be primed with deep primer Tiefengrund and such a surface can be painted with any standard paint. Room temperature must be at least +10 °C during application and drying of the filler.</p>

18.79 € EUR

SKU: 11395

Brand: Knauf

EAN: 5901793357942

This product is available at Zum.lv - the largest online store in Latvia.

View product on site