Paint Pentatop Universal M A 2.7L Semi-Matt

<p>Multifunctional weather-resistant urethane alkyd enamel. Areas of use: 1) Painting steel surfaces used outdoors and indoors. Thanks to the corrosion inhibitors included in the composition, it reliably protects metal surfaces. It is permitted to apply directly onto steel surfaces or onto surfaces previously primed with alkyd primers manufactured by RILAK. 2) Painting wooden and concrete floors indoors. It may also be used for painting wooden floors (boards laid on balconies, terraces, attics, etc.) used in outdoor conditions, provided that the surface is not subject to constant static water exposure. Long-term static water exposure (for example, in cases where water accumulates on the painted wooden surface, forming puddles that take a long time to dry) can cause it to penetrate the wood through defects (or damage) in the painted surface. This will lead to swelling of the wood, which in turn may cause cracking of the coating. Using PENTATOP UNIVERSAL enamel for painting concrete floors used in outdoor conditions is not permitted.</p><u>Properties:</u><ul><li>Semi-matt</li><li>Product intended for indoor and outdoor use</li><li>Roller application permitted</li><li>Brush application permitted</li><li>Spray application permitted</li><li>Product can be tinted</li><li>Solvent can be used for thinning and tool cleaning</li><li>Dries in 16 h</li><li>Coverage 9 - 11 m²/l</li><li>Volume 2.7 l</li></ul><u>Surface preparation:</u><p>Before applying PENTATOP UNIVERSAL, dirt and corrosion products (rust) must be removed from the metal surface. If complete removal of corrosion products is not possible, it is necessary to at least remove the loose layer of rust and carry out the maximum possible surface cleaning with abrasive means (sandpaper, steel brush, grinding tools, etc.). In this case, it should be noted that the effectiveness of anti-corrosion protection may be slightly reduced. Remove dirt from the floor surfaces to be painted. Before applying PENTATOP UNIVERSAL to previously painted surfaces, it is necessary to carry out a test painting on a small area of the surface followed by an interlayer adhesion check. New concrete surfaces may be painted no sooner than 28 days after completion (having first cleaned them of laitance; see separate instructions for concrete surface preparation). The absolute moisture content of the concrete must not exceed 4%. For wooden floors used in outdoor conditions, it is recommended to first prime them with the colourless wood protection paint TEKSTURDEKOR.</p><u>Application:</u><p>Before use, thoroughly stir PENTATOP UNIVERSAL, and if necessary thin with white spirit or solvent VAITSOL to working viscosity: 0 – 10% by volume. Apply PENTATOP UNIVERSAL onto clean and dry prepared surfaces with a brush, roller, or spray gun in 1 – 2 coats when painting primed surfaces or 2 – 3 coats when painting unprimed metal surfaces. When painting floors, apply the enamel in 2 coats with a brush or roller. The temperature of the air and the surface to be painted must not be lower than +5°C. Relative air humidity must not exceed 85%. Enamel consumption is 9 – 11 m²/l per coat. Drying time at (20±2)°C is no more than 16 hours.</p>

37.49 € EUR

SKU: 12571

Brand: RILAK

EAN: 4750445115857

This product is available at Zum.lv - the largest online store in Latvia.

View product on site