Primer 5kg QG Quartz

<p>Quartz sand contact primer for priming low-absorbency or non-absorbent substrates.</p>Application:<ul><li>For priming walls, ceilings and floors</li><li>For dense, smooth, low-absorbency concrete and similar substrates before plastering, tiling and other work</li><li>Tintable</li><li>For interior and exterior use</li></ul>Properties:<ul><li>White colour to identify the primed surface</li><li>Reduces and evens out the surface absorption capacity</li><li>Improves adhesion</li><li>Strengthens the surface</li><li>Does not contain solvents</li></ul>Substrate preparation:<ul><li>The substrate must be dry, firm and free of cracks</li><li>Clean the substrate of weak and/or detachable layers, as well as dust, dirt, oils, paint residues and other adhesion-reducing contaminants</li><li>Carry out priming work only after all sanding work has been fully completed</li></ul>Application:<ul><li>Mix the primer thoroughly before use</li><li>Apply the primer undiluted</li><li>Apply with a brush, roller or spray equipment in 1 or 2 coats</li><li>Application temperature +5°C to +25°C</li></ul>Additional instructions:<ul><li>Avoid the formation of puddles and runs — the primer must be fully absorbed into the surface</li><li>Do not mix the primer with other materials or dilute with water! This may cause drastic changes in the primer's properties</li><li>Wash tools with water immediately after use</li><li>Do not freeze</li></ul>Consumption:<ul><li>Concrete (dry) 600 g/m²</li><li>Silicate brick 575 g/m²</li><li>Aerated concrete 875 g/m²</li><li>Plasterboard 350 g/m²</li><li>Fibreboard 375 g/m²</li><li>Wood 600 g/m²</li><li>Consumption depends on the roughness and porosity of the surface, as well as the priming method and conditions</li></ul>Technical data:<ul><li>Chemical composition - water polymer dispersion without organic solvents, with fillers and additives</li><li>Colour white / tintable</li><li>Density 1.7 ± 0.05 g/cm³</li><li>pH 8 - 9</li><li>VOC (V°C) content 2 g/l</li><li>Drying time at 23°C and relative humidity 50% ~3 h</li></ul>

14.89 € EUR

SKU: 14882

Brand: Sakret

EAN: 4751006560956

This product is available at Zum.lv - the largest online store in Latvia.

View product on site