PVC Window Profile with Fibreglass Mesh 9x120x2400mm
<p>The profile with reinforcement mesh and TPE sealing strip is used to connect a window and/or door frame to a composite thermal insulation system. It protects the window or door frame from mechanical damage and dirt during plastering work, prevents finish render from getting onto the window or door frame, and helps prevent cracks. It creates a flexible connection between the insulation system and the window and door frame. Size 9 x 120 x 2400 mm.</p><p>The window connection profile is glued to the substrate after the installation of insulation boards. Before installing the self-adhesive window connection profile, ensure that the surface to which the profile is attached is flat and clean (not greasy, dirty, dusty, sooty, mossy, etc.). If necessary, clean the bonding surface before installing the profile. The window profile must be installed and pressed from top to bottom, pressing the profile firmly along its entire length. The fibreglass mesh attached to the profile must remain fully embedded in the reinforcement mortar used. The render and finishing layer must not exceed the line indicating the removal point of the plastic protective strip. The plastic protective strip, to which the window protective film is attached, must be carefully removed only after the render and finishing coat has dried. When using the product, the outdoor temperature as well as the surface temperature of the window or door frame must not be lower than +5°C or higher than +40°C. When used at temperatures below the recommended level, the initially weaker adhesion and longer bonding time must be taken into account. Window connection profiles must not be stored or transported in a twisted or bent condition, as this may cause permanent deformation and release of the adhesive bond. The optimal storage temperature for the products is from -5°C to +40°C. Products must be stored horizontally, protected from moisture, prolonged sunlight, and mechanical load.</p>
2.19 €
EUR
SKU: 190090
Brand: EST PROFIIL
EAN: 4742879010099
- Self-Adhesive PVC Profile Strip 12.5mm 2.5m
- Aluminium Corner Bead 30x30 Perforated 0.4mm 2.5m
- Corner Bead Galvanized Plaster 36x36 0.4mm 2.5m
- Precise Plastering Bead 0.4mm ZN 10mm 2.5m
- Drywall Corner Bead ZN 30x30 Perforated 0.4mm 2.8m
- Stūris PVC 24x25mm 2.5m
- Profile Self-Adhesive Strip with Rubber Edge PVC J12 12.5mm 2.5m
- PVC J12 Profile Strip 12.5mm 2.5m
- Aluminum Corner Profile 23x23 0.35mm 2.5m
- Plaster Screed for Precise Plastering 0.4mm ZN 10mm 3.0m
- Corner Bead with Mesh 10x10mm 2.5m
- Corner Profile with Yellow Mesh 10x15 cm 2.5m (50)
This product is available at Zum.lv - the largest online store in Latvia.
View product on site