Sealant Kiilto Masa 290ml Grey
<p>Multi-purpose adhesive sealant for the construction, marine, boat, and transport industries. Also suitable for expansion joints subject to mechanical stress. Good adhesion to various types of stone, concrete, most metals, wood, glass and glazed surfaces, as well as epoxy and polyester surfaces. When using with plastic materials, it is recommended to perform adhesion tests before actual use. Complies with M1 building material emission classification. Does not contain solvents, isocyanates or phthalates. Paintable with most water-based paints (always test before use). Very good resistance to weathering, good resistance to ultraviolet radiation. Good resistance to chemicals (weak solutions). Resistant to salt water. Not suitable for glazing.</p><u>Characteristics:</u><ul><li>Good adhesion to various materials, good resistance to weathering and UV radiation</li><li>NSF registered - can be used in areas where food processing is carried out</li><li>Intended for bonding and sealing</li><li>Coverage 5 x 5 mm joint, approx. 12 m / 290 ml</li><li>Drying time 3 mm/d, approx. 10 mm/7d</li><li>Suitable for indoor and outdoor use</li></ul><u>Technical Data:</u><ul><li>Density/specific gravity approx. 1.59 kg/l</li><li>Store unopened at +10 to +25°C</li><li>Shore A hardness 40</li><li>Shrinkage approx. 2%</li><li>Skin formation time approx. 15 min (23°C, 50% relative humidity)</li><li>Viscosity approx. 1.5 million mPas (BrookField H-Path T-F/2.5 +20°C)</li><li>Consistency - high viscosity paste</li><li>Curing rate 3 mm/d, approx. 10 mm/7 d (23°C / 50% relative humidity)</li><li>Binder type - silyl-modified polymer</li><li>Elongation at break 400% (DIN 53504)</li><li>Application temperature +1°C to +40°C</li><li>Heat resistance when dry -40°C to +90°C, +180°C/30 min</li><li>Max. joint deformation ± 10%</li><li>Tensile shear strength 2.2 N/mm² (SS-SS)</li><li>Tensile strength 2.1 N/mm² (DIN 53504)</li><li>Colour grey</li></ul><u>Instructions for Use:</u><p>The surfaces to be bonded must be free of dust, grease and oil. When bonding large, uniform surfaces or surfaces in very dry conditions, it is recommended to lightly spray them with water (approx. 5 - 10 g/m²). It is recommended to clean surfaces with Kiilto Cleaner 303 and prime with Kiiltoflex Metalliprimer.<br>Cut off the tip of the tube cone. Screw the dispensing nozzle back on and cut it to the required size corresponding to the joint width. Apply the sealant with a manually operated or compressed air gun and, if necessary, smooth to the desired shape with a moistened spatula. After use, seal the packaging carefully. Uncured product can be cleaned with white spirit or acetone. Cured product can only be removed mechanically. Ambient conditions such as air humidity and temperature, the material and moisture of the bonding surface, as well as the amount of sealant applied, significantly affect the skin formation time and curing.</p>
5.59 €
EUR
SKU: 15830
Brand: Kiilto
EAN: 6411512432298
- Sealant Kiilto Masa 290ml Brown
- Silicone 300ml Pronova Sanitary Clear
- Silicone 300ml Pronova Sanitary White
- Parquet Acrylic 300ml Dark Oak
- Parquet Acrylic Sealant 300ml Swamp Oak
- Parquet Acrylic Sealant 300ml Light Maple
- Parquet Acrylic Sealant 300ml Walnut
- Parquet Acrylic Sealant 300ml Beech
- Parquet Acrylic Sealant 300ml Light Grey
- Sealant 280ml Wet Room 323c White
- Sealant 280ml Universal 315C White
- Sealant 280ml Wet Room 323 Transparent
This product is available at Zum.lv - the largest online store in Latvia.
View product on site