Window Insulation Tape Penosil 100mm 25m with Butyl External

Name: Window Insulation Tape Penosil 100mm 25m with Butyl External
Brand: Penosil
SKU: 61248
Price: 17.29 EUR
Availability: InStock

Tape for covering window and door joints from the outside. Ensures water vapour diffusion from the inside to the outside. Protects joints and building structures from moisture and wind. Width 100 mm, length 25 m.Advantages:<ul><li>Seam tape for covering window and door joints from the outside.</li><li>Ensures water vapour diffusion from the inside to the outside.</li><li>Protects joints and building structures from moisture and wind.</li><li>The adhesive strips have very good adhesion to all common building materials.</li><li>The tape material can be plastered and painted.</li><li>Stretchable in width and resistant to wall structure movements.</li></ul>Adhesion:<ul><li>Wood</li><li>Concrete</li><li>Metal</li><li>PVC</li><li>Masonry</li><li>Various vapour and wind barrier membranes</li></ul>Instructions for use:Cut the required length of tape. Remove the protective film from the adhesive strip and stick the tape to the window frame. If the window or door is installed flush with the wall surface, additional free space equal to the tape width must be left at the corners. If the window or door is installed inward from the wall surface, additional free space equal to half the tape width must be left at the corners.The tape is applied around the perimeter of the frame, starting from the bottom strip of the window. Proceed in the same way on all sides of the window that need to be sealed. Then install the window or door frame in place, secure it properly and fill the window joint with construction foam. Once the foam has cured, remove all excess foam and attach the other edge of the tape to the frame/wall. To achieve optimal adhesion, use a soft roller.The adhesive strips on both sides of the window tape allow it to be installed either before or after the installation of windows/doors and the use of assembly foam.Recommendations:<ul><li>Installation surfaces must be clean, dry and free of oils, grease and dust.</li><li>Do not use chemical substances that contain agents that prevent or reduce adhesion.</li><li>Surface roughness, unevenness or porosity may reduce adhesion.</li><li>Non-adhesive surfaces are recommended to be stabilised by priming with PENOSIL Premium BetPrimer adhesive dispersion solution at a ratio of 1:5.</li><li>PENOSIL Premium SpeedFix All Exterior 777 adhesive sealant is suitable for joining the beginning and end of the tape.</li><li>If the tape's adhesive strip becomes dusty or loses its adhesive ability for any other reason, alternatively use PENOSIL Premium SpeedFix All Exterior 777 adhesive sealant to attach the tape.</li><li>The tape must be covered at the earliest opportunity, but no later than two months after its installation.</li></ul>

17.29 € EUR

SKU: 61248

Brand: Penosil

EAN: 4743307170552

This product is available at Zum.lv - the largest online store in Latvia.

View product on site