Aerosol Paint 400ml PRO White for Baths and Tiles
<p>White paint with a satin finish, developed with modified epoxy resins. Ideally suited for painting baths, sinks and tiles. Its high moisture resistance and extremely strong adhesion make this paint perfectly suited for renovating bathrooms or kitchens, optimally restoring any porcelain or ceramic surface. In white colour, it can be repainted with a varnish or paint to change the gloss level or colour of the finish.</p>Properties:<ul><li>Good adhesion to ceramics and porcelain</li><li>High moisture resistance</li><li>UV resistant</li><li>Easy to apply</li><li>Can be overcoated with other paints and varnishes</li></ul>Usage:<ul><li>Before use, shake the aerosol very well for approximately one minute after hearing the sound of the mixing ball.</li><li>Apply to clean and dry surfaces, removing mould, grease, soap residues and other dirt. Prepare the surface with a sponge and a bathroom cleaning solution to create a slightly porous surface for better adhesion. Clean the entire surface again and rinse with water. Sand the entire surface with P400 or P600 wet/dry sandpaper. Clean and dry before painting.</li><li>Apply the paint from a distance of 15 - 20 cm. Apply in thin coats to avoid paint build-up. Three thin coats are always better than one thick coat. Always test the product on a small area of the surface before painting.</li><li>The surface can be recoated with the same paint after 30 - 60 minutes. Other products can be applied after 24 hours. After 72 hours the bath can be used as normal.</li><li>When application is complete, invert the aerosol and empty the valve after use. If the nozzle becomes blocked, replace it with a new one.</li><li>Do not use on equipment connected to the power supply.</li><li>Use in well-ventilated areas.</li></ul>Technical Data:<ul><li>Gloss 60° 10 - 20%</li><li>Dry to touch (ASTM D-1640 ISO 1517) after 30 - 60 min.</li><li>Total drying time (ASTM D-1640 ISO 1517) 72 h</li><li>Coverage 1.5 m<sup>2</sup> per 400 ml</li><li>Heat resistance of dried paint +100°C</li><li>Working temperature<ul><li>Ambient +8°C</li><li>Surface from +5°C to +40°C</li></ul></li><li>Humidity level max. 85% R.H.P</li></ul>
9.09 €
EUR
SKU: 38816
Brand: Montana
EAN: 8427744159337
- Aerosol Paint 400ml PRO Acrylic Lacquer Satin
- Aerosol Paint 400ml PRO White Anti-Corrosion
- Aerosol Primer Paint 400ml PRO Anti-Rust Grey
- Aerosol Paint 500ml PRO for Stain Coverage
- Aerosol Paint 400ml PRO Anti-Slip
- Aerosol Paint 400ml PRO Copper Chrome
- Aerosol Paint 400ml PRO Stainless Steel Welding Technology
- Aerosol Paint 400ml 94 Black
- Spray Paint 400ml PRO Mirror Effect
- Aerosol Paint 400ml PRO Acrylic Lacquer Matte
- Aerosol Paint 400ml PRO Black Hammered Effect
- Aerosol Paint 400ml 94 White
This product is available at Zum.lv - the largest online store in Latvia.
View product on site