Aurlak M 2.7L Semi-Matt Parquet Lacquer

<p>Fast-drying alkyd-urethane lacquer designed for lacquering parquet floors in interior works. It forms a hard, glossy film with high water and wear resistance.</p><u>Properties:</u><ul><li>Semi-matt</li><li>Product intended for interior use</li><li>Solvent can be used for thinning and cleaning tools</li><li>Application by brush is permitted</li><li>Application by roller is permitted</li><li>Drying time 3 h</li><li>Consumption 8-12 m²/l</li><li>Volume 2.7 l</li></ul><u>Usage:</u><p>Before use, stir the lacquer. If necessary, thin to working viscosity with white spirit or VAITSOL solvent. These same solvents are used for cleaning work tools. Apply the lacquer onto clean, dry wooden surfaces with a roller or brush in 2-3 coats at a consumption (excluding losses during application) of 8-10 m²/l per coat. The temperature of the air and the surface being lacquered must be between +5°C and +30°C. Relative air humidity must not exceed 85%. When applying the first coat, thin the lacquer with 10% solvent by lacquer volume. For the remaining coats, thin the lacquer as follows: 0-5% by lacquer volume. Light sanding between coats is recommended. Sanding is mandatory if the drying time between coats exceeds 48 hours. Drying time at 20°C – 3 hours (at 10°C – 6 hours). Recommended drying time before applying the next coat – from 8 to 48 hours. The coating reaches maximum hardness after 5 days from the application of the last coat. When working with the lacquer, ensure good air circulation and use protective equipment for eyes, face, and skin (goggles, gloves, etc.). The lacquer must be stored in a tightly sealed container, protected from heat.</p>

29.09 € EUR

SKU: 12590

Brand: RILAK

EAN: 4750445116144

This product is available at Zum.lv - the largest online store in Latvia.

View product on site