Elvi Facade Filler 1.6kg

<p>Moisture-resistant filler based on acrylic latex, suitable for exterior and interior (especially rooms with increased humidity) finishing work. Designed for filling cracks, recesses and final levelling of surfaces before painting. Good adhesion to various surfaces – concrete, lightweight concrete, plaster, gypsum board, brick, wood (wood moisture content not exceeding 10%). Easy to apply and sands well.</p><u>Surface preparation:</u><p>Remove any unstable surface layer; porous and highly moisture-absorbent surfaces should be primed with ELVI TPB–5, A–05 or another priming agent before filling.</p><u>Surface treatment:</u><p>Mix the filler thoroughly before use. Apply the filler with a filling knife onto a clean, dry, firm surface. Apply the next layer of filler only after the previous layer has fully dried and sanded areas have been primed. After the layer has dried, sand the filled surface smooth with fine-grit sandpaper.</p><u>Technical data:</u><ul><li>Solvent: water</li><li>Colour: white</li><li>Maximum particle size: 80 μm</li><li>Density: 1.80 g/cm³</li><li>Maximum layer thickness for a single application: 4 mm</li><li>Layer drying time at +10°C to +25°C and relative air humidity of 75%: from 1.5 to 20 hours (depending on layer thickness)</li><li>Recommended air and surface temperature: from +10°C to +25°C</li><li>Consumption for a 1 mm layer with full surface filling: approximately 1 l/m²</li><li>Packaging: 1.6 kg</li></ul>

5.09 € EUR

SKU: 15039

Brand: Elvi

EAN: 4751001650393

This product is available at Zum.lv - the largest online store in Latvia.

View product on site