Elvi Facade Filler 5kg

<p>Moisture-resistant filler based on acrylic latex, suitable for exterior and interior (especially in rooms with increased humidity) finishing work. Intended for filling cracks, indentations and final levelling of surfaces before painting. Good adhesion to various surfaces – concrete, lightweight concrete, plaster, plasterboard, bricks, wood (wood moisture content no more than 10%). Easy to apply and sands well.</p><u>Surface preparation:</u><p>Remove any weak surface layers; porous and highly absorbent surfaces should be primed with ELVI TPB–5, A–05 or another priming agent before filling.</p><u>Surface treatment:</u><p>Before use, mix the filler thoroughly. Apply the filler with a filling knife to a clean, dry, solid surface. Apply the next layer of filler only after the previous layer has dried completely and sanded areas have been primed. After the layer has dried, sand the filled surface smooth with fine-grit sandpaper.</p><u>Technical data:</u><ul><li>Solvent: water</li><li>Colour: white</li><li>Maximum particle size: 80 μm</li><li>Density: 1.80 g/cm³</li><li>Maximum layer thickness per single application: 4 mm</li><li>Layer drying time at +10°C to +25°C and relative air humidity of 75%: from 1.5 to 20 hours (depending on layer thickness)</li><li>Recommended air and surface temperature: +10°C to +25°C</li><li>Consumption for a 1 mm layer with full surface filling approximately 1 l/m²</li><li>Packaging: 5 kg</li></ul>

13.49 € EUR

SKU: 15048

Brand: Elvi

EAN: 4751001650409

This product is available at Zum.lv - the largest online store in Latvia.

View product on site