Facade Filler Kiilto TT 20kg

<p>Kiilto TT is a cement-based levelling filler for brick walls for interior and exterior use. Suitable for levelling and filling stone material surfaces. The treated surface can be tiled or sealed with Kiilto waterproofing membrane. Depending on the intended application, it can also be re-filled with other Kiilto wall fillers.</p><u>Technical data:</u><ul><li>Hardening speed approx. 24 h (+18 °C), depending on layer thickness and ambient conditions</li><li>Working temperature +18 to +20 °C, minimum application temperature +5 °C</li><li>Working time 3 - 4 h (+18 °C)</li><li>Colour - grey</li><li>Max. grain size 0.5 mm</li><li>Substrate moisture - concrete < 90% relative humidity</li><li>Consumption 1 mm layer/m², powder yield approx. 1.4 kg</li><li>Binder type - polymer / cement / limestone based powder</li><li>Mixing ratio 4 – 4.5 l water / 20 kg bag</li><li>Bond strength > 0.5 MPa (EN 998-1)</li><li>Layer thickness for partial surface levelling 1 – 30 mm, for re-filling 1 – 5 mm</li></ul><u>Instructions for use:</u><p>The surface to be filled must be firm, clean and dust-free. Dry surfaces should be slightly moistened before filling. Before applying a new layer, ensure that the previous layer is completely dry. If necessary, sand and clean the surface thoroughly before applying a new filler coat.</p><p>Slowly add Kiilto TT powder into cool (+18 to +20 °C), clean water while continuously mixing until a homogeneous mass is formed. Allow the ready mixture to stand for approx. 10 – 15 minutes and then mix again. Apply the filler mass by hand using a steel spatula or spray with a spray gun designed for fillers. Mechanically applied filler coats should be levelled by hand using a steel spatula.</p>

11.49 € EUR

SKU: 133407

Brand: Kiilto

EAN: 6411512153209

This product is available at Zum.lv - the largest online store in Latvia.

View product on site