Glue Moment FIX Decor 380g

<p>Construction adhesive for decorative elements.</p><u>Properties</u>:<ul><li>For absorbent surfaces indoors</li><li>Can be painted after curing</li><li>Easy and quick to clean surfaces</li><li>Solvent-free – also ideal for sensitive surfaces (e.g. polystyrene foam)</li><li>Odourless – also ideal for use in apartments/homes</li><li>Initial bond 120 kg/m²</li><li>Dries quickly on absorbent surfaces</li><li>Fills gaps up to 10 mm wide</li><li>80% of the cartridge is made from recycled plastic</li></ul><u>Application areas</u>:<ul><li>Plastered surfaces indoors</li><li>Concrete</li><li>Aerated concrete</li><li>Pumice</li><li>Fibre concrete</li><li>Bricks</li><li>Styrene/mortar/cardboard panels</li><li>Wood-based materials (e.g. chipboard)</li><li>Rigid polyurethane foam</li><li>Not recommended for bonds permanently submerged in water</li></ul><u>Instructions for use</u>:<ul><li>Ensure that the surfaces to be bonded are clean and free from dust, grease and oil; surfaces must not be permanently moist</li><li>To ensure a firm, secure bond, one surface must be porous, as water must evaporate for bonding to occur</li><li>With highly water-absorbent substrates such as gypsum, MDF, chipboard (not OSB) and clay bricks, the adhesive may dry too quickly around the outer perimeter of the application area, resulting in inadequate bonding on the inside</li><li>To achieve a proper bond on highly absorbent substrates, moisten the surface with a bottle sprayer or a damp cloth before bonding</li><li>Before applying adhesive to decorative polyurethane panels, remove any adhesive residue with sandpaper or a solvent such as acetone</li><li>Cut the end of the cartridge above the screw thread, attach the plastic nozzle and cut the tip of the nozzle at an angle</li><li>Insert the cartridge into the gun</li><li>Apply adhesive to one of the surfaces to be bonded (in patches to level uneven surfaces, in wave-shaped lines for larger surfaces for better initial bond, or in straight lines for smaller surfaces)</li><li>When used outdoors, apply in vertical lines</li><li>To stop the flow of adhesive, release the gun trigger after each use</li><li>When bonding panels, plastic decorative parts, acoustic panels etc., place the panel 1–2 cm away from the bonding point, then slide it into the required position and press firmly</li><li>If the substrate is smooth and rigid, panels can be bonded directly to the surface</li><li>For uneven surfaces, we recommend creating mechanically fixed sub-frames from small wooden panels or rigid polystyrene or polyurethane foam strips (width 5–10 cm, thickness 5–20 mm, distance between strips 30–65 cm depending on the panels to be bonded)</li><li>Remove all adhesive residue immediately with a damp cloth</li><li>Cured material can only be removed mechanically</li></ul><u>Technical data</u>:<ul><li>Density approximately 1.30 g/cm³</li><li>Heat resistance from –20°C to +70°C</li><li>Bonding time approximately 10 min</li><li>Working temperature from +10°C to +40°C</li><li>Initial bond 10–14 g/cm³</li><li>Final strength (DIN EN 205) from 5 to 6 N/mm²</li><li>Curing time 12 h</li><li>Consumption for a 6 mm strip approximately 11 m or approximately 400 g/m²</li></ul>

4.39 € EUR

SKU: 35653

Brand: Moment

EAN: 9000101137729

This product is available at Zum.lv - the largest online store in Latvia.

View product on site