Paint Villa Akva C 9L Wood Facade

<p>Matte water-based paint Villa Akva C base for wood surfaces in exterior applications. The paint forms a dirt and water-repellent surface. Villa Akva provides excellent colour and gloss retention. When the product is used according to instructions, protection against weathering of up to 15 years is ensured. Must be tinted before use.</p><u>Technical Data:</u><ul><li>Recommended application for exterior use</li><li>Consumption 4 - 9 m²/l</li><li>Sheen matte</li><li>Application method brush, sprayer</li><li>Application conditions - the surface to be painted must be clean and dry (relative moisture content of wood below 20%), air temperature above +5°C and relative air humidity during painting and drying – below 80%, avoid excessively high temperatures during painting</li><li>Drying time (23°C, relative air humidity 50%) - touch dry after 1 h, can be recoated after 4 h</li><li>Binder acrylate</li><li>Volume 9 l</li></ul><u>Surface Preparation:</u><p>Unpainted surfaces:<br>Clean the surface of dust and dirt. Wash dirty and greasy surfaces with the cleaning agent Special Clean, rinse with water and allow to dry. Wash mouldy surfaces with Tikkurila Homeenpoisto solution according to instructions, rinse with water and allow to dry. Treat metal parts, such as nail heads, with a suitable anti-corrosion primer. Remove resin from knot areas. Prime the surface as early in the manufacturing stage as possible with Villa Lasur Akva or Villa Protekt. Continue work by applying Villa Primer and 1 coat of Villa Akva, or 2 coats of Villa Akva without Villa Primer. Treat the ends of the product thoroughly.</p><p>Previously painted surfaces:<br>Clean the surface of dust and dirt. Wash dirty and greasy surfaces with the cleaning agent Special Clean, rinse with water and allow to dry. Wash mouldy surfaces with Tikkurila Homeenpoisto solution according to instructions, rinse with water and allow to dry. Remove any flaking paint from previously painted wood surfaces with a scraper and wipe the surface clean with a wire brush. Treat previously acrylic-painted surfaces with Villa Akva in 1 - 2 coats depending on the condition of the surface and colour differences. If the old surface is worn or painted with oil paints, prime the old paint surface with Villa Primer and the old acrylic paint surface with Villa Akva. Paint the surface with Villa Akva paint. Pay particular attention to the ends and edges of the wood product.</p><p>Industrially primed surfaces:<br>Apply Villa Akva in 1 - 2 coats. Industrially primed surfaces that have been exposed to weathering for more than 10 months must be treated with Villa Primer and repainted with Villa Akva in 1 - 2 coats. Pay particular attention to the ends and edges of the wood product.</p><u>Application:</u><p>Before use, stir the paint thoroughly and, if necessary, thin with water. Apply with a brush or high-pressure sprayer. Treat the ends of the product thoroughly. To avoid colour differences, mix a sufficient amount of paint for the entire surface in one container. Caution! To protect from product splashes, plants and surfaces not intended for treatment must be covered. Wood contains resins and other colouring secretions, especially at knot areas. Under the influence of moisture and temperature, these may cause yellowing or resin bleeding through the painted surface. The use of a primer (Villa Primer) reduces resin bleeding through the paint film.</p>

69.49 € EUR 64.59 € EUR (-7%)

SKU: 243876

Brand: Vivacolor

EAN: 4740193235051

This product is available at Zum.lv - the largest online store in Latvia.

View product on site