Aurlak M Parquet Lacquer 0.9L Glossy

<p>The fast-drying alkyd-urethane lacquer is intended for lacquering parquet floors in interior works. It forms a hard, glossy film with high water and wear resistance.</p><u>Properties:</u><ul><li>Glossy</li><li>Product intended for indoor use</li><li>Solvent can be used for thinning and tool cleaning</li><li>Application by brush is permitted</li><li>Application by roller is permitted</li><li>Drying time 3 h</li><li>Consumption 8-12 m²/l</li><li>Volume 0.9 l</li></ul><u>Application:</u><p>Before use, stir the lacquer. If necessary, thin to working viscosity with white spirit or VAITSOL solvent. These same solvents are used for cleaning work tools. Apply the lacquer onto clean, dry wooden surfaces with a roller or brush in 2-3 coats with a consumption (not counting losses during application) of 8-10 m²/l per coat. The temperature of the air and the surface being lacquered must be between +5°C and +30°C. Relative air humidity must not exceed 85%. When applying the first coat, thin the lacquer with 10% solvent by volume of the lacquer. For applying subsequent coats, thin the lacquer as follows: 0-5% by volume of the lacquer. Light sanding between coats is recommended. Sanding is mandatory if the drying time between coats exceeds 48 hours. Drying time at 20°C – 3 hours (at 10°C – 6 hours). Recommended drying time before applying the next coat – from 8 to 48 hours. The coating reaches maximum hardness after 5 days from the application of the last coat. When working with the lacquer, ensure good air circulation and use eye, face and skin protection (goggles, gloves, etc.). The lacquer should be stored in a tightly sealed container, protected from heat.</p>

9.99 € EUR

SKU: 12589

Brand: RILAK

EAN: 4750445116106

This product is available at Zum.lv - the largest online store in Latvia.

View product on site