Ceiling Paint BINDO 2 4.5L Completely Matte

<p>Highly matte, completely white and thick emulsion ceiling paint Bindo 2 creates a flawless surface finish. The uniform consistency of the formula ensures easy application and allows you to achieve an evenly smooth surface without visible roller marks. The paint is characterized by a mild odor and very low VOC (volatile organic compound) content. The Nordic Swan Ecolabel certifies compliance with strict environmental standards. The paint is intended for painting ceilings in residential and public spaces. Suitable for new and previously painted plaster, concrete and filled surfaces, as well as plasterboard surfaces.</p><u>Properties:</u><ul><li>Sheen - highly matte</li><li>Consumption 10 - 12 m²/l</li><li>Drying time - dust-dry after 1 h, next coat can be applied after 2 h</li><li>Required coats 2</li><li>Leaves no visible roller marks</li><li>Easy to apply and quick to dry</li><li>Nordic Swan Ecolabel</li><li>Volume 4.5 l</li></ul><u>Application:</u><p>The substrate must be dry, clean, free of grease and dust. If necessary, wash the surface with lukewarm water, and use a suitable detergent for very dirty surfaces. After using a detergent, rinse the surface with clean water. Old peeling paint and poorly adhering layers must be removed down to a firm base. To improve adhesion, surfaces previously painted with oil or alkyd paint must be sanded with sandpaper. Cracks and unevenness in the substrate should be filled with a suitable filler from the Sadolin product range. The surface should be smoothly sanded and cleaned of dust. Porous surfaces, e.g., filled or previously unpainted plaster, concrete and brick surfaces, as well as plasterboard, should be primed with Grund primer. Previously untreated fibreboard and particleboard panels and surfaces of varying porosity (e.g., partially filled) should be primed with Super Grund primer.</p><p>Before use, stir the paint thoroughly. Apply 2 coats of paint to the surface with a roller, brush or sprayer, allowing the surface to dry completely between coats. The previous coat must be completely dry before applying the next coat. Large surfaces must be painted without interruption; breaks are only permissible at corners.</p><p>When painting, make sure there is always enough paint on the roller. Apply the paint generously so that the painted surface retains moisture longer, as this will make it easier to even out. Ceilings should be painted in the direction of the falling light, i.e., the leveling strokes should be made from the window side. During painting, the air and surface temperature must be between +10 and +25°C (recommended +18±2°C), and the relative air humidity 40–80% (recommended 65%). If the temperature is higher or lower than recommended, or if there is a draft, a poor-quality paint film may form.</p><p>The paint is ready to use and does not need to be thinned. Thinning the paint or applying it in a thinner coat than recommended may impair the product's properties.</p><p>Under normal conditions, the paint film fully hardens within 4 weeks after painting, so the surface must not be washed or cleaned until the specified time has elapsed. After 4 weeks the surface becomes washable. Dirty painted surfaces should be cleaned with lukewarm, clean water; if necessary, a neutral (pH 6–7) cleaning agent may be used. Cleaning agents containing organic solvents (e.g., alcohol) are not suitable. Use a damp cloth or soft sponge to clean the surface. Do not use abrasive cleaners, rough sponges or hard brushes. After using a detergent, rinse the surface with clean water.</p>

29.09 € EUR 23.29 € EUR (-20%)

SKU: 205384

Brand: Sadolin

EAN: 4740182478032

This product is available at Zum.lv - the largest online store in Latvia.

View product on site