Cement Mortar ZM 25kg

Cement Mortar Sakret ZM:<ul><li>For laying bricks and blocks</li><li>Cement base</li><li>Strength class M10</li><li>For masonry, plastering and repair work</li><li>Plastic</li><li>Excellent mechanical and climatic resistance</li><li>Especially suitable for wet rooms</li><li>Can be used for chimney masonry</li><li>In grey or white colour</li><li>High hydrophobicity and water vapour permeability</li></ul>Application:<ul><li>The substrate must be dry and firm, all cracks and voids must be filled</li><li>Blocks or bricks must be clean and dry</li><li>Clean the substrate of less stable and/or detachable layers</li><li>Particularly dense and/or smooth substrates must be treated with an abrasive material</li><li>Highly water-absorbent surfaces must be primed with SAKRET BG primer or SAKRET UG primer (diluted at a ratio of 1:3)</li><li>Particularly smooth concrete surfaces must be primed with SAKRET QG primer</li><li>Mix SAKRET ZM in a clean container with cold water until a homogeneous lump-free mass is formed</li><li>It is recommended to use a mixer at 600 rpm</li><li>After the maturing time (~3 minutes), mix again</li><li>Technical data refers to a temperature of +20°C and 50% relative humidity. Lower temperatures increase, higher temperatures decrease the stated values</li><li>During the setting phase, protect the mortar from sun, draught and excessively high temperatures (&gt;30°C)</li><li>Protect fresh mortar from rain and excessively rapid drying</li><li>Once the mortar has started to set, no more water must be added!</li><li>Immediately after use, wash out containers and tools with water</li><li>Hardened mortar can only be removed mechanically</li><li>Contains cement, reacts alkalinely</li><li>Protect skin and eyes, follow technical instructions. If mortar gets into eyes, rinse with plenty of water; consult a doctor if necessary</li><li>Protect packaging from weather conditions, store on wooden pallets in a cool and dry place, cover torn packaging immediately</li></ul>Technical Data:<ul><li>Full strength achieved after 28 days</li><li>Consumption ~17 kg/m² (for a layer thickness of 10 mm)</li><li>Strength class (according to standard LVS EN 998-1) CS IV</li><li>Strength class (according to standard LVS EN 998-2) M10</li><li>Grain size ≤2 mm</li><li>Volume of ready mortar (25 kg) ~ 15 L</li><li>pH 11 - 13.5</li><li>Drying time for 1 mm plaster layer 24 h</li></ul>
4.19 € EUR
SKU: 11397
Brand: Sakret
EAN: 4751006562059

This product is available at Zum.lv - the largest online store in Latvia.

View product on site