Lime-Cement Mortar 25kg PM Super

Cement-lime mortar Sakret PM Super:<ul><li>Lime / cement based</li><li>Strength class - M5</li><li>Excellent adhesion to all types of mineral surfaces</li><li>Especially suitable for wet rooms</li><li>For masonry, plastering and repair work</li><li>Excellent mechanical durability</li><li>Available in grey or white</li><li>High water vapour permeability</li></ul>Application:<ul><li>The substrate must be dry and firm, all cracks and voids must be filled</li><li>Blocks or bricks must be clean and dry</li><li>Clean the substrate of any less stable and/or detachable layers</li><li>Particularly dense and/or smooth substrates must be treated with an abrasive material</li><li>Highly water-absorbent surfaces should be primed with SAKRET BG primer or SAKRET UG primer (diluted at a ratio of 1:3)</li><li>Particularly smooth concrete surfaces should be primed with SAKRET QG primer</li><li>Mix SAKRET PM Super in a clean container with cold water until a homogeneous lump-free mass is formed</li><li>It is recommended to use a mixer at 600 rpm</li><li>After the maturation time (~3 minutes), mix again</li><li>Technical data refer to a temperature of +20°C and 50% relative humidity. Lower temperatures increase, higher temperatures decrease the stated values</li><li>During the mortar setting phase, protect from sunlight, draughts and excessive temperatures (&gt;30°C)</li><li>Protect fresh mortar from rain and excessively rapid drying</li><li>Once the mortar has started to set, no more water must be added!</li><li>Immediately after use, wash containers and tools with water</li><li>Hardened mortar can only be removed mechanically</li><li>Contains cement, reacts alkaline</li><li>Protect skin and eyes, observe technical instructions. If mortar gets into eyes, rinse with plenty of water and seek medical attention if necessary</li><li>Protect packaging from weather conditions, store on wooden pallets in a cool and dry place, cover torn packaging immediately</li></ul>Technical data:<ul><li>Complies with standard LVS EN 998-2</li><li>Grain size ≤1 mm</li><li>Volume of ready mortar (25 kg) ~16 l</li><li>Strength class CS III</li><li>Drying time for 1 mm plaster layer 24 h</li><li>Full hardness achieved after 28 days</li><li>Consumption ~16 kg/m² (for a layer thickness of 10 mm)</li><li>Fire safety class Euroclass A1 (non-combustible)</li></ul>
4.89 € EUR
SKU: 14886
Brand: Sakret
EAN: 4751006561847

This product is available at Zum.lv - the largest online store in Latvia.

View product on site