Floor Levelling Compound BAM 25kg
Levelling compound for floors:<ul><li>For levelling floors (3 - 40 mm)</li><li>For levelling floors before final finishing</li><li>Can be used as a final coat on low-traffic surfaces</li><li>For levelling full and partial horizontal surfaces</li><li>For creating slopes</li><li>For repairing defects in concrete substrates</li><li>Suitable for heated floors</li><li>Frost and moisture resistant</li><li>Mechanically levellable</li><li>Cement-based</li></ul>Surface preparation:<ul><li>The substrate must be dry and firm, all cracks and voids must be filled</li><li>Clean the substrate of less stable and/or detachable layers</li><li>Absorbent surfaces must be primed with SAKRET UG primer (diluted 1:2)</li><li>Dry and highly absorbent surfaces must be primed twice!</li><li>The floor compound can be used on concrete and other mineral material substrates</li><li>It is prohibited to use SAKRET BAM on gypsum or anhydrite substrates!</li><li>When used on heated floors, the heating must be turned off 5 days before and must not be turned on for 28 days after application!</li></ul>Application:<ul><li>Mix SAKRET BAM in a clean container with cold water until a homogeneous lump-free compound is formed</li><li>It is recommended to use a mixer at 600 rpm</li><li>After a maturation time of ~3 min., remix</li><li>Do not dilute a compound that has started to set with water, but remix with a mixer</li><li>Pour the compound onto the surface (layer thickness ≥3 mm) and level</li><li>Floor expansion joints must not be filled with the levelling compound</li><li>When levelling substrates, damping material must be installed along the perimeter</li><li>When using the material for large-area floor levelling, floor expansion joint intervals must be strictly observed</li></ul>Instructions:<ul><li>Technical data refers to a temperature of +20°C and 50% relative air humidity. Lower temperature increases, higher temperature decreases the stated values</li><li>During the curing phase, protect the levelling compound from sunlight, draughts, frost and excessively high temperatures (>25°C)</li><li>Hardened compound can only be removed mechanically</li><li>Contains cement, reacts alkaline</li><li>Protect skin and eyes, follow technical instructions. If the mortar gets into eyes, rinse with plenty of water and seek medical attention if necessary</li><li>Protect packaging from weather conditions, store on wooden pallets in a cool and dry place, cover torn packaging immediately</li></ul>Technical data:<ul><li>Maximum grain size ≤ 2.5 mm</li><li>Compressive strength class (LVS EN 13813) C20</li><li>Flexural strength class (LVS EN 13813) F4</li><li>Consumption ~16 kg/m² (at a layer thickness of 10 mm)</li><li>Fully loadable after 28 days</li><li>Fire resistance class Euroclass A1 (non-combustible)</li><li>Wear resistance class (according to standard LVS EN 13813) A12</li></ul>
6.59 €
EUR
SKU: 14881
Brand: Sakret
EAN: 4751006560765
- Lime-Cement Mortar 25kg PM Super
- Cement Mortar ZM 12.5kg
- Mortar Weber M100/600 25kg
- Mortar Furnace Mix 5kg Heat-Resistant 750C
- Mortar Stove Mix 25kg Heat-resistant 750C
- Plaster Mortar 25kg Climaplast Plus Grey
- Concrete Mix BF 25kg Winter
- Concrete Repair Mortar RS 5kg
- Java Sakret Multi Mix 4in1 25kg Universal
- Masonry Mortar ZF 25kg Winter
- Lime-Cement Mortar 40kg PM Super
- Masonry Mortar Weber M100/600 25kg Winter
This product is available at Zum.lv - the largest online store in Latvia.
View product on site