Floor Adhesive M1000 Eco 3 L

<p>Water-based acrylate dispersion adhesive for bonding vinyl carpets and tiles, linoleum, as well as textile carpets on rubber and foam backing and thick (more than 0.6 mm) vinyl wall coverings onto absorbent and non-absorbent substrates in dry and wet rooms. Can be used for floors with underfloor heating, as well as for laying Kiilto KeraSafe membranes. Complies with the M1 building material emission classification. Also suitable for floor coverings that do not contain PVC. Does not contain 2-ethylhexanol. Does not contain APEO compounds, phthalates, or other plasticizers.</p><u>Technical Data:</u><ul><li>Density / specific weight 1.1 kg/l</li><li>Working time wet bonding 0 - 20 min., late wet bonding 10 - 30 min., allowing adhesive to dry 30 - 60 min.</li><li>Substrate relative humidity for concrete max. 85%, for wood 8 - 12%</li><li>Consumption 4 - 6 m²/l</li><li>Binder type - acrylate copolymer</li><li>Application temperature +18 to +25 °C</li><li>Volume 3 l</li></ul><u>Instructions for Use:</u><p>The substrate must be dry, firm, flat, degreased, and clean. Rough and uneven surfaces should be levelled with a suitable Kiilto floor levelling compound. Seams between floor panels should be levelled. When laying covering on construction boards, follow the board manufacturer's instructions. Mix the adhesive before use. Apply to the substrate with a fine-notched trowel or roller. Bonding is performed using the wet bonding method. Press the covering immediately onto the substrate and smooth out carefully. If the covering is rigid or needs to be bent, it is recommended to allow the adhesive to dry for 10 - 20 minutes before pressing the covering onto the substrate. When bonding a dense covering onto a completely non-absorbent substrate, allow the adhesive to dry for 60 minutes before pressing the covering onto the substrate. An alternative to the wet bonding method is to immerse the covering in adhesive along its entire length, remove it, allow to dry for 20 - 30 minutes, and then carefully smooth the covering onto the substrate along its entire length. Fresh adhesive stains should be cleaned with water. Dried adhesive should be removed with a strongly alkaline cleaning agent or xylene. When bonding the covering, also follow the covering manufacturer's instructions.</p>

21.19 € EUR

SKU: 186472

Brand: Kiilto

EAN: 6411511011036

This product is available at Zum.lv - the largest online store in Latvia.

View product on site