Foam 800ml Elastic 198 Gunfoam
<p>Single-component polyurethane mounting gun foam for pressure-sensitive, flexible joints and various penetration sealing, as well as installation work. The foam is easily compressible, elastic and particularly suitable for window and door installation.</p><u>Advantages</u>:<ul><li>Elastic, easily compressible, restores original shape after compression</li><li>Very suitable for use in fragile constructions due to especially low expansion pressure</li><li>Fast curing</li><li>Precise dosing and economical use</li><li>Good resistance to vibrations</li><li>Good adhesion to various building materials</li><li>Can be used with a foam gun</li></ul><u>Application</u>:<ul><li>Window and door installation and sealing</li><li>Filling of pressure-sensitive and narrow joints</li><li>Insulation of ventilation devices and pipes</li><li>Filling of significantly moving seams and cavities</li><li>Thermal and sound insulation</li><li>Reducing the effect of thermal bridges</li></ul><u>Adhesion</u>:<ul><li>Wood</li><li>Concrete</li><li>Masonry</li><li>Bricks</li><li>Most metals</li><li>Gypsum boards</li><li>EPS</li><li>Roof tiles</li></ul><u>Usage</u>:<p>Shake the canister vigorously at least 20 times. Hold the canister in a vertical position and remove the adapter cap. Screw the canister onto the gun, holding the gun handle with one hand and screwing the canister with the other. When screwing, make sure the gun is not pointed at people. The canister must not be screwed onto the gun with the valve facing down, or by screwing the gun onto the canister. During use, turn the canister upside down and press the gun trigger evenly. Regulate the amount of foam with the gun trigger.</p><u>Recommendations</u>:<ul><li>A pre-moistened surface ensures faster foam curing and better results</li><li>At low temperatures, the foam must be warmed up before use – room or water temperature must not exceed +30 °C</li><li>Air temperature during application from -5 °C to +30 °C, best results at +20 °C</li><li>Canister temperature during application from +5 °C to +25 °C, best results at +20 °C</li><li>Surfaces must be clean from dust, dirt and oil</li><li>Cured foam is sensitive to UV rays and must be covered</li><li>Do not use on surfaces that are in permanent contact with water</li><li>Insulation foam does not adhere to polyethylene (PE), PTFE (Teflon®) or silicone surfaces</li><li>Do not use at temperatures below -5 °C</li></ul>
6.09 €
EUR
SKU: 37424
Brand: Penosil
EAN: 4743307160386
- Foam 750ml Gap Filling 278 with Straw Applicator
- Foam 750ml All Purpose 172 Gunfoam
- Foam Cleaner Solution 500ml Foam Cleaner 949
- Foam Makroflex GreenQ Gun Foam 750ml BAL
- Solution for Foam 320ml Foam Remover 995
- Foam 750ml All Purpose 165 Gunfoam Winter
- Foam 750ml Soudal Yellow Gun
- Foam 750ml PENOSIL Construction Gun
- Foam 750ml Makroflex PRO Winter
- Construction Foam Soudal Yellow 750ml Gun Grade Winter
- Foam StabFix 2k Foam (A+B) 600ml
- Foam StabFix 2k Foam (A+B) 1L
This product is available at Zum.lv - the largest online store in Latvia.
View product on site