Latex Paint BINDO 3 1L Deep Matte

<p>A uniform and thick emulsion paint for ceilings and walls that creates a deeply matte and flawless surface finish. It applies easily and dries quickly, allowing you to achieve professional-looking results without much effort. Can be tinted in light shades. Bindo 3 paint has a mild odour and a very low VOC (volatile organic compound) content. The paint has also been awarded the Nordic Ecolabel "Nordic Swan", certifying compliance with strict environmental standards. The paint is intended for painting ceilings and walls in residential and public spaces (where high abrasion resistance is not required). Suitable for new and previously painted plaster, concrete and filled surfaces, as well as plasterboard surfaces.</p><u>Application:</u><p>The base surface must be dry, clean, free of grease and dust. If necessary, the surface should be washed with lukewarm water, while heavily soiled surfaces should be treated with a suitable detergent. After using the detergent, rinse the surface with clean water. Old peeling paint and poorly bonded surface layers must be removed down to a firm base. To improve adhesion, surfaces previously painted with oil or alkyd paint should be sanded with sandpaper. Cracks and unevenness in the base surface should be filled with a suitable filler from the Sadolin product range. The surface should be sanded smooth and cleaned of dust.</p><p>Before use, the paint should be thoroughly stirred. Apply 2 coats of paint to the surface using a roller, brush or sprayer, allowing the surface to dry completely between coats. The previous coat of paint must be completely dry before applying the next coat. Large surfaces should be painted without interruption; breaks are only permissible at corners. When painting, ensure the roller always has a sufficient amount of paint. Apply the paint generously so that the painted surface retains moisture longer, as this will make it easier to even out. During painting, the air and surface temperature should be between +10 and +25°C (recommended +18±2°C), and the relative air humidity 40–80% (recommended 65%). If the temperature is higher or lower than recommended, or if there is a draught, a poor-quality paint film may form.</p><p>The paint is ready to use and does not need to be thinned. Thinning the paint or applying it in a thinner coat than recommended may impair the product's properties.</p><p>Under normal conditions, the paint film fully hardens within 4 weeks after painting, so the surface must not be washed or cleaned until the specified time has elapsed. After 4 weeks, the surface becomes resistant to cleaning. Dirty painted surfaces should be cleaned with lukewarm, clean water; if necessary, a neutral (pH 6–7) cleaning agent may be used. Cleaning agents containing organic solvents (e.g. alcohol) are not suitable. Use a damp cloth or soft sponge to clean the surface. Do not use abrasive cleaners, rough sponges or hard brushes. After using the cleaning agent, rinse the surface with clean water.</p><u>Product properties:</u><ul><li>Deeply matte</li><li>Conceals surface imperfections</li><li>Easy to apply and quick to dry</li><li>Nordic Ecolabel "Nordic Swan"</li><li>Coverage 8–10 m²/l</li><li>Drying time 1 h</li><li>Coats 2</li><li>Volume 1 l</li></ul>

8.39 € EUR

SKU: 9088

Brand: Sadolin

EAN: 7391306136429

This product is available at Zum.lv - the largest online store in Latvia.

View product on site