Lime-Cement Mortar 40kg PM Super
Cement-lime mortar Sakret PM Super:<ul><li>Lime / cement based</li><li>Strength class - M5</li><li>Excellent adhesion to all types of mineral surfaces</li><li>Especially suitable for wet rooms</li><li>For masonry, plastering and repair work</li><li>Excellent mechanical durability</li><li>Grey or white colour</li><li>High water vapour permeability</li></ul>Application:<ul><li>The substrate must be dry and firm, all cracks and voids must be filled</li><li>Blocks or bricks must be clean and dry</li><li>Clean the substrate of any less stable and/or detachable layers</li><li>Particularly dense and/or smooth substrates must be treated with an abrasive material</li><li>Highly water-absorbent surfaces must be primed with SAKRET BG primer or SAKRET UG primer (diluted at a ratio of 1:3)</li><li>Particularly smooth concrete surfaces must be primed with SAKRET QG primer</li><li>Mix SAKRET PM Super in a clean container with cold water until a homogeneous lump-free mass is formed</li><li>It is recommended to use a mixer at 600 rpm</li><li>After the maturing time (~3 minutes), mix again</li><li>Technical data refers to a temperature of +20°C and 50% relative humidity. Lower temperatures increase, higher temperatures decrease the stated values</li><li>During the mortar setting phase, protect from sunlight, drafts and excessively high temperatures (>30°C)</li><li>Protect fresh mortar from rain and excessively rapid drying</li><li>Once the mortar has started to set, no more water must be added!</li><li>Immediately after use, wash out containers and tools with water</li><li>Hardened mortar can only be removed mechanically</li><li>Contains cement, reacts alkalinely</li><li>Protect skin and eyes, follow technical instructions. If mortar gets into eyes, rinse with plenty of water and consult a doctor if necessary</li><li>Protect packaging from weather conditions, store on wooden pallets in a cool and dry place, cover torn packaging immediately</li></ul>Technical data:<ul><li>Complies with standard LVS EN 998-2</li><li>Grain size ≤1 mm</li><li>Volume of ready mortar (40 kg) ~26 l</li><li>Strength class CS III</li><li>Drying for 1 mm plaster layer 24 h</li><li>Full hardness achieved after 28 days</li><li>Consumption ~16 kg/m² (for a layer thickness of 10 mm)</li><li>Fire safety class Euroclass A1 (non-combustible)</li></ul>
6.69 €
EUR
SKU: 16768
Brand: Sakret
EAN: 4751006560031
- Masonry Mortar Weber M100/600 25kg Winter
- Concrete Weber 25kg Base10 for Floors
- Weber floor110 fine 20kg 4-30mm self-leveling
- Adhesive for Aerated Concrete Blocks Porenbetonkleber 25kg White
- Self-leveling compound mira 6700 cemplan 25 kg 1-45mm
- Self-leveling compound mira 6600 cemplan 15 kg 0-10mm
- Self-Leveling Compound with Fibers mira x-plan 25 kg 2-50mm
- Weber Floor dB PORAND 20kg 10-50mm Self-Leveling
- Non-Shrink Mortar RM 25kg
- Floor Self-Leveling Compound NSP 25kg 3-20mm for Concrete Surfaces
- Knauf Adhesive Mortar Klebespachtel P 25kg for Polystyrene
- Knauf Klebespachtel M Adhesive Mortar for Mineral Wool 25kg
This product is available at Zum.lv - the largest online store in Latvia.
View product on site