Moment FIX Wood Construction Adhesive 385g

<p>Construction adhesive for wood materials.</p><u>Properties</u>:<ul><li>For absorbent surfaces indoors</li><li>Initial bond 350 kg/m², no mechanical support required during drying</li><li>Very good bond, especially with wood</li><li>Solvent-free – ideal for sensitive surfaces (e.g. polystyrene foam)</li><li>Odour-free – also ideal for use in apartments/homes</li><li>Can be painted after curing</li><li>Surface is quickly and easily cleaned</li><li>Dries quickly on absorbent surfaces</li><li>Fills gaps up to 10 mm wide</li><li>80% of the cartridge is made from recycled plastic</li></ul><u>Application areas</u>:<ul><li>Wood and wood-based materials (e.g. panels, profiles, chipboards)</li><li>Plastered surfaces indoors</li><li>Concrete</li><li>Aerated concrete</li><li>Pumice</li><li>Fibre concrete</li><li>Bricks</li><li>Styrene/mortar/cardboard panels and rigid polyurethane foam</li><li>Not recommended for bonds permanently submerged in water</li></ul><u>Instructions for use</u>:<ul><li>Ensure that the surfaces to be bonded are clean and free from dust, grease and oil; surfaces must not be permanently damp</li><li>To ensure a firm, secure bond, one surface must be porous, as water must evaporate for bonding to occur</li><li>For highly water-absorbent substrates such as gypsum, MDF, chipboard (not OSB) and clay bricks, the adhesive may dry too quickly along the outer perimeter of the application area, resulting in improper bonding on the inside</li><li>To achieve proper bonding on highly absorbent substrates, moisten the surface with a bottle sprayer or damp cloth before bonding</li><li>Before applying adhesive to decorative polyurethane panels, remove adhesive residues with sandpaper or a solvent such as acetone</li><li>Cut the end of the cartridge above the screw thread, attach the plastic nozzle and cut the nozzle tip at an angle</li><li>Insert the cartridge into the gun</li><li>Apply adhesive to one of the surfaces to be bonded (in dabs to level uneven surfaces, in wave patterns for larger surfaces for better initial bond, or in straight lines for smaller surfaces)</li><li>When using outdoors, apply in vertical lines</li><li>To stop the flow of adhesive, release the gun trigger after each use</li><li>For bonding panels, plastic decorative elements, acoustic panels, etc., place the panel 1–2 cm away from the bonding area, then slide it into the required position and press firmly</li><li>If the substrate is smooth and rigid, panels can be bonded directly to the surface</li><li>For uneven surfaces, we recommend creating mechanically fixed substructures from small wooden panels or rigid polystyrene or polyurethane foam strips (width 5–10 cm, thickness 5–20 mm, distance between strips 30–65 cm depending on the panels being bonded)</li><li>Remove all adhesive residues immediately with a damp cloth</li><li>Cured material can only be removed mechanically</li></ul><ul><li>Density approx. 1.30 g/cm³</li><li>Heat resistance from –20°C to +70°C</li><li>Working temperature from +10°C to +40°C</li><li>Initial bond 35 g/cm³</li><li>Final strength (DIN EN 205) from 4 to 5 N/mm²</li><li>Curing time 12 h</li><li>Consumption for a 6 mm strip approx. 11 m or approximately 400 g/m²</li></ul>

5.39 € EUR

SKU: 35652

Brand: Moment

EAN: 9000101138108

This product is available at Zum.lv - the largest online store in Latvia.

View product on site