Paint Villa Aqua C 0.9L Wood Facade

Name: Paint Villa Aqua C 0.9L Wood Facade
Brand: Vivacolor
SKU: 243875
Price: 7.89 EUR
Availability: InStock

Matte water-based paint Villa Akva C base for wooden surfaces in exterior use. The paint forms a dirt and water-repellent surface. Villa Akva provides excellent colour and gloss retention. When the product is used according to the instructions, protection against weathering is ensured for up to 15 years. Must be tinted before use.Technical Data:<ul><li>Recommended use for exterior work</li><li>Consumption 4 - 9 m²/l</li><li>Sheen matte</li><li>Application method brush, sprayer</li><li>Application conditions - the surface to be painted must be clean and dry (relative moisture content of wood below 20%), air temperature above +5°С and relative air humidity during painting and drying – below 80%, avoid excessively high temperatures during painting</li><li>Drying time (23°C, relative air humidity 50%) - touch dry after 1 h, can be recoated after 4 h</li><li>Binder acrylate</li><li>Volume 0.9 l</li></ul>Surface Preparation:Unpainted surfaces: Clean the surface of dust and dirt. Wash dirty and greasy surfaces with Special Clean detergent, rinse with water and allow to dry. Wash mouldy surfaces with Tikkurila Homeenpoisto solution according to the instructions, rinse with water and allow to dry. Treat metal parts, such as nail heads, with a suitable anti-corrosion primer. Remove resin from knot areas. Prime the surface as early as possible in the manufacturing stage with Villa Lasur Akva or Villa Protekt. Continue work by applying Villa Primer and 1 coat of Villa Akva, or 2 coats of Villa Akva without Villa Primer. Carefully treat the ends of the product.Previously painted surfaces: Clean the surface of dust and dirt. Wash dirty and greasy surfaces with Special Clean detergent, rinse with water and allow to dry. Wash mouldy surfaces with Tikkurila Homeenpoisto solution according to the instructions, rinse with water and allow to dry. Remove flaking paint layers from previously painted wooden surfaces with a scraper and wipe the surface clean with a wire brush. Treat surfaces previously painted with acrylic paints with Villa Akva in 1 - 2 coats depending on the condition of the surface and colour differences. If the old surface is worn or painted with oil paints, prime the old paint surface with Villa Primer and the old acrylic paint surface with Villa Akva. Paint the surface with Villa Akva paint. Pay particular attention to the ends and edges of the wooden product.Industrially primed surfaces: Apply Villa Akva in 1 - 2 coats. Industrially primed surfaces that have been exposed to weathering for more than 10 months must be treated with Villa Primer and recoated with Villa Akva in 1 - 2 coats. Pay particular attention to the ends and edges of the wooden product.Application:Stir the paint thoroughly before use and, if necessary, thin with water. Apply with a brush or high-pressure sprayer. Carefully treat the ends of the product. To avoid colour differences, mix a sufficient amount of paint for the entire surface in one container. Caution! To protect from product splashes, plants and surfaces not intended to be treated must be covered. Wood contains resins and other colouring secretions, especially at knot areas. Under the influence of moisture and temperature, these can cause yellowing or resin bleeding through the painted surface. Using a primer (Villa Primer) reduces resin bleeding through the paint film.

9.29 € EUR 7.89 € EUR (-15%)

SKU: 243875

Brand: Vivacolor

EAN: 4740193235013

This product is available at Zum.lv - the largest online store in Latvia.

View product on site