Parquet Filler Penosil 300ml PF92 Alder/Spruce

Name: Parquet Filler Penosil 300ml PF92 Alder/Spruce
Brand: Penosil
SKU: 61246
Price: 2.19 EUR
Availability: InStock

Plastoelastic acrylic sealant for sealing joints in lacquered and unlacquered parquet and laminate floors. Color PF92 alder / spruce.Characteristics:<ul><li>Insulates and seals wood and laminate joints</li><li>Can be polished after full curing</li><li>Paintable</li><li>Almost odorless</li><li>Shrinks slightly during curing and becomes very hard</li><li>Withstands surface movements up to 5%</li><li>Solvent-free</li><li>Can be used on damp, primed surfaces if adequate ventilation is provided</li></ul>Application:<ul><li>Sealing lacquered and unlacquered parquet and laminate floors</li><li>Surface leveling in carpentry and joinery work</li><li>Furniture restoration</li></ul>Adhesion:<ul><li>Wood</li><li>Plaster</li><li>Cement</li><li>Drywall</li><li>Bricks</li><li>Metals</li><li>Concrete</li></ul>Instructions for use:Cut off the top threaded part of the cartridge and screw on the special nozzle-applicator for applying the sealant. The nozzle should be cut at a 45° angle to create a sufficient opening for dispensing. Insert the cartridge with the applicator into the gun and fill the applicator with sealant by pressing the gun trigger several times. Apply the sealant into the joint by repeatedly and evenly pressing the gun trigger while smoothly pulling the applicator along the joint. After applying the sealant, smooth it out with a rubber spatula. Remove excess silicone. In some cases it is better to use a putty scraper. After applying the sealant, the joints must be protected from water, dirt, and heavy mechanical load until a durable film forms on the surface of the material. Once the parquet filler is fully dried, it can be sanded with an appropriate machine or by hand. Before sanding, make sure the filler layer is sufficiently hard and fully dried. Do not use excessively coarse sandpaper, which may damage the joints. Once the parquet filler is fully dried, it can be coated with most commercially available parquet lacquers, after first verifying the compatibility of the sealant with the lacquer by performing a test.Recommendations:<ul><li>Surfaces must be clean of grease, oil, dust, and dirt</li><li>Application temperature from +5°C to +40°C</li><li>Do not use on surfaces in permanent contact with water</li><li>High humidity levels slow down the drying process</li><li>The filler does not withstand large deformations; for moving joints it is better to use flexible materials such as silicone sealants</li></ul>

2.59 € EUR 2.19 € EUR (-15%)

SKU: 61246

Brand: Penosil

EAN: 4743307161550

This product is available at Zum.lv - the largest online store in Latvia.

View product on site