Polyester Universal Filler 500g

<p>Two-component filler for filling, levelling or covering cracks, defects and unevenness on virtually any surface. Montana universal polyester filler is lightweight, multifunctional and styrene-free. Designed for use on sheet steel, aluminium, polyester and wood. Its high thixotropy allows bonding and filling. It is easy to apply and sand, does not crack or shrink during drying, and can be repainted with any enamel. The product includes a tube of catalyst (to be mixed with the paste at a ratio of 2%) and a spatula.</p>Properties:<ul><li>Styrene-free</li><li>Good adhesion</li><li>Creamy formula</li><li>Easy to sand</li><li>Flexible</li><li>Temperature resistant up to +200&deg;C</li><li>Packaging 500 g</li></ul>Usage:<ul><li>Sand and degrease the surface. Apply the filler directly onto the surface. If a primer is applied, use only 2K epoxy primer.</li><li>Mix the filler until both components are fully integrated and the colour is uniform.</li><li>Apply the product with a 100:2 mixture. Avoid excess catalyst. Dry at temperatures above 5&deg;C and relative humidity below 70%.</li><li>If too much catalyst is applied, a "peroxide stain" effect occurs, which affects the colour after finishing. This happens when more than 7% is applied.</li><li>Sand with P80 - P150 sandpaper and then with P240 sandpaper. For a finer finish, sand with higher grit sandpaper.</li><li>Before final finishing and sanding with P600/800, it is recommended to apply an isolation primer coat.</li><li>Clean the spatulas before the product hardens.</li></ul>

16.89 € EUR

SKU: 39754

Brand: Montana

EAN: 8427744379827

This product is available at Zum.lv - the largest online store in Latvia.

View product on site