Primer-Enamel Proteksol 50 0.9L for Metal Green

<p>Fast-drying anti-corrosion primer-enamel PROTEKSOL 50 based on modified alkyd polymer, designed for painting steel surfaces indoors and outdoors. Forms a hard semi-gloss coating with high abrasion resistance. Recommended for painting metal structures, industrial equipment and other objects without prior priming in cases where an accelerated painting process is required.</p><u>Properties:</u><ul><li>Product intended for indoor and outdoor use</li><li>Application by roller is permitted</li><li>Application by brush is permitted</li><li>Application by spray gun is permitted</li><<li>Solvent can be used for thinning and cleaning tools</li><li>Drying time 10 h</li><li>Consumption 5.9 - 8.3 m²/l per coat. (Dry film thickness 50 - 70 μm)</li><li>Volume 0.90 l</li><li>Color green</li></ul><u>Usage:</u><p>Before use, stir the primer-enamel thoroughly. If necessary, thin to working viscosity with white spirit or VAITSOL solvent: 0 - 5% – when applying by roller or brush. Application of the primer-enamel by spray method is only permitted in painting booths of industrial plants and workshops. The same solvents are also used for cleaning work tools. The temperature of the air and the surface to be painted must be between +5ºC and +35ºC. Air humidity no higher than 85%. Steel surfaces must be cleaned of dirt, corrosion products (rust) and degreased before applying the primer-enamel. In cases where complete removal of corrosion products from the surface is not possible, it is necessary, at a minimum, to remove the loose rust layer and carry out the maximum possible surface treatment with abrasive tools such as sandpaper, steel brush, grinding machines, etc. In this case, a possible reduction in the effectiveness of anti-corrosion protection must be taken into account. Apply the primer-enamel on clean and dry surfaces in 2 coats with a brush, roller, spray gun or airless spray equipment (with nozzle diameter 0.011″-0.017″). Drying time of each coat at +20°C is 10 hours (at +10°C is 14 hours). Recommended dry film thickness per coat 50 - 70 μm. Store in a tightly closed container, away from direct sunlight.</p>
12.19 € EUR
SKU: 12486
Brand: RILAK
EAN: 4750445116458

This product is available at Zum.lv - the largest online store in Latvia.

View product on site