Adhesive and Reinforcing Mortar BAK-F Anti-Frost Grey 25kg
Sakret BAK-F reinforcing and adhesive mortar for use in low temperature conditions:<ul><li>For use at low air temperatures from 0°C to +20°C</li><li>For bonding and reinforcing stone wool and expanded polystyrene thermal insulation boards</li><li>Cement-based</li><li>Reinforced with polypropylene fiber</li><li>With additives improving adhesion and elasticity</li><li>Water vapor permeable</li><li>Water and frost resistant</li><li>In grey color</li></ul>Surface preparation:<ul><li>Substrates must not be covered with frost, ice or snow, and the surface temperature must be ≥2°C</li><li>The substrate must be dry and firm, all cracks and voids must be filled</li><li>Clean the substrate from less stable and/or detachable layers</li><li>Particularly dense and/or smooth substrates must be treated with an abrasive material</li><li>Highly water-absorbent surfaces must be primed with SAKRET BG primer or SAKRET UG primer (diluted at a ratio of 1:3)</li></ul>Reinforcing thermal insulation boards:<ul><li>Apply SAKRET BAK-F onto the thermal insulation board in an even layer (up to 5 mm), spread with a notched trowel, embed the alkali-resistant reinforcing mesh into the mass and level with a flat trowel so that the reinforcing mesh is completely covered with SAKRET BAK-F</li><li>If the thermal insulation board is made of mineral wool, SAKRET BAK-F must first be rubbed into the board surface</li></ul>Bonding thermal insulation boards:<ul><li>If the wall is flat (unevenness <10 mm/m), apply SAKRET BAK-F with a notched trowel (tooth size - 10 mm) over the entire surface of the thermal insulation board and bond to the substrate</li><li>If the wall is uneven, apply SAKRET BAK-F along the edges of the thermal insulation boards (~5 cm wide and 2 cm high) and place 6 dabs of material on the board surface, then bond to the wall</li><li>If the thermal insulation board is made of mineral wool, SAKRET BAK-F must first be rubbed into the board surface</li></ul>Technical data:<ul><li>Chemical composition - cement, special inert additives, auxiliary materials and substances for improving processing properties</li><li>Complies with standard LVS EN 998-1</li><li>Consumption for bonding ~4 - 6 kg/m²</li><li>Consumption for reinforcing ~4 - 7 kg/m²</li><li>Fire safety class Euroclass A1 (non-combustible)</li><li>Shelf life 6 months</li><li>Packaging 25 kg</li></ul>
9.39 €
EUR
SKU: 229828
Brand: Sakret
EAN: 4751006563704
- Adhesive Mortar for Insulation Boards Kleber PM 25kg
- Java CN71 25kg Floor Self-Leveling Compound 0.5-10mm
- Concrete Clone Weber S100 25kg
- Java CT29 25kg Mineral Filler
- Mortar for Floors RS88 25kg Fast-Setting 1-100 mm
- Floor Screed CN87 25kg Fast-Setting 10-200mm
- Self-Leveling Floor Compound 25 kg Knauf 1-40 mm Nivello140
- Adhesive for Aerated Concrete Blocks 25kg GMS Grey
- Concrete Clone Weber S100 25kg Winter
- Java CN69 25kg Floor Self-Leveling Compound 1-15mm
- Java CN75 25kg Floor Self-Leveling Compound 1-50mm
- Concrete Clone BE 25kg
This product is available at Zum.lv - the largest online store in Latvia.
View product on site