Floor Screed CN87 25kg Fast-Setting 10-200mm
<p>Ceresit floor screed CN 87 is a fast-setting and exceptionally durable cement mixture designed for the construction of monolithic floors and various types of screeds from 10 to 200 mm thickness. This professional screed provides a stable, mechanically resistant and waterproof base for subsequent floor covering installation, making it suitable for both residential and commercial premises. The product is versatile and can be used for traditional cement and concrete screeds, as well as screeds with a separating layer, acoustic or thermal insulation, including heated floors where a greater layer thickness is required.</p><p>The mixture has a densely plastic consistency that allows precise formation of slopes and levelling of the surface while maintaining high load resistance. After mixing with water, the screed sets rapidly, allowing foot traffic after approximately 3 hours, and ceramic tiles, waterproofing or other coverings can be applied after just 24 hours. Ceresit CN 87 is suitable for use indoors and outdoors, and provides a secure base for materials bonded with Ceresit CM series adhesives, as well as synthetic resin coatings.</p><p>Before applying the screed, the substrate must be clean, mechanically sound and free of substances that reduce adhesion. Cement substrates must have a moisture content of up to 4%, while anhydrite substrates up to 0.5%. On wet or unstable surfaces, CN 87 is recommended to be applied on a separating layer. The mixture is prepared by slowly pouring the powder into 2.5 l of clean, cold water and mixing until a homogeneous mass is achieved. For larger workloads, mechanical mixing is recommended. After application, the screed should be levelled with a float or vibrating screed bar and protected from rapid temperature changes and draughts.</p>Technical data:<ul><li>Floor screed thickness 10 - 200 mm</li><li>Water consumption 2.5 l per 25 kg of mixture</li><li>Substrate temperature +10 to +25 °C</li><li>Foot traffic after 3 hours</li><li>Floor covering application after 24 hours</li><li>Compressive strength C35</li><li>Flexural strength F5</li><li>Shrinkage approx. 80 mm per metre</li><li>Reaction to fire A1fl</li><li>Consumption approx. 2 kg/m² per mm of thickness</li><li>Packaging 25 kg</li></ul>
8.49 €
EUR
SKU: 250374
Brand: Ceresit
EAN: 7332531127394
- Self-Leveling Floor Compound 25 kg Knauf 1-40 mm Nivello140
- Adhesive for Aerated Concrete Blocks 25kg GMS Grey
- Concrete Clone Weber S100 25kg Winter
- Java CN69 25kg Floor Self-Leveling Compound 1-15mm
- Java CN75 25kg Floor Self-Leveling Compound 1-50mm
- Concrete Clone BE 25kg
- Cement Mortar ZM 25kg
- Adhesive Mortar BK 25kg
- Adhesive and Reinforcing Mortar BAK Grey 25kg
- Concrete BH 35 25kg
- Concrete Clone BE 40kg
- Cement Mortar ZM 40kg
This product is available at Zum.lv - the largest online store in Latvia.
View product on site