Java CN75 25kg Floor Self-Leveling Compound 1-50mm

<p>Java Ceresit CN 75 Fibre is suitable for use on concrete and anhydrite cement floors and old ceramic tiles in a layer of 1 - 50 mm thickness. Also on OSB, fibreboard and plasterboard panels in a layer up to 15 mm thick. For pouring layers thicker than 50 mm, it is recommended to use Java Ceresit CN 80 or CN 87. The product can be used in both wet and dry interior spaces.</p><p>During pouring, underfloor heating systems can be incorporated into Ceresit CN 75. The compound can be covered with a waterproofing layer from the Ceresit CL or CR product range. For exterior building surfaces, floor compounds Ceresit CN 76, CN 83, CN 80 or CN 87 can be used.</p><u>Properties:</u><ul><li>self-leveling</li><li>reinforced with fibre reinforcement</li><li>with adjustable consistency</li><li>suitable for heated screeded surfaces</li><li>also suitable for wooden surfaces</li><li>can be used in dry and wet rooms</li><li>can be applied with a pump</li></ul><u>Application:</u><p>Substrates must be clean, crack-free, undamaged, dry, and free of substances that may impair adhesion. Substrates must comply with the relevant applicable local standards.</p><p>Mix CN 75 with clean, clear water (see quantity in the technical data sheet). Mix with an electric drill fitted with a mixer at approximately 600 rpm until the mixture is completely lump-free.</p><p>Pour the leveling mixture onto the floor and spread with a broom, leveling trowel or rubber roller.</p><p>Then use a spiked roller to release any air bubbles. If the compound is mixed in batches, apply these batches without delay, wet on wet.</p>
15.89 € EUR
SKU: 10775
Brand: Ceresit
EAN: 4743152001674

This product is available at Zum.lv - the largest online store in Latvia.

View product on site