Concrete Clone BE 25kg
Concrete Clone BE:<ul><li>Concrete class C25</li><li>Intended for the manufacture of concrete and reinforced concrete structures</li><li>Excellent mechanical and climatic resistance</li><li>Water and frost resistant</li></ul>Application:<ul><li>The surface must be firm, stable and free of cracks</li><li>Clean the surface of less stable and/or detachable layers</li><li>Particularly dense and/or smooth substrates must be treated with an abrasive material</li><li>Follow all SAKRET BE preparation conditions indicated on the material packaging</li><li>When concreting, use non-absorbent or weakly absorbent formwork</li><li>In reinforced concrete structures, ensure sufficient protective cover for reinforcement</li><li>For large horizontal structure surfaces, observe expansion joint intervals</li><li>Treat formwork with formwork oil</li><li>Place concrete in formwork evenly and compact it</li><li>Apply the clone at the required layer thickness, compact, level and smooth</li><li>Do not fill expansion joints with concrete!</li><li>Technical data refers to a temperature of +20°C and 50% relative humidity. Lower temperature increases, higher temperature decreases the specified values</li><li>During the mortar hardening phase, protect from sunlight, drafts and excessively high temperatures (>30°C)</li><li>Protect fresh mortar from rain and excessively rapid drying</li><li>Once the mortar has started to set, water must not be added!</li><li>Immediately after use, wash containers and tools with water</li><li>Hardened mortar can only be removed mechanically</li><li>Contains cement, reacts alkaline</li><li>Protect skin and eyes, follow technical instructions. If mortar gets into eyes, rinse with plenty of water and consult a doctor if necessary</li><li>Protect packaging from weather conditions, store on wooden pallets in a cool and dry place, cover torn packaging immediately</li></ul>Technical Data:<ul><li>Strength class C25</li><li>Grain size ≤12 mm</li><li>Volume of ready mortar (25 kg) ~ 12.5 L</li><li>Consumption 80 kg/m² (at a layer thickness of 40 mm)</li><li>Fire safety class Euroclass A1 (non-combustible)</li></ul>
3.59 €
EUR
SKU: 11396
Brand: Sakret
EAN: 4751006561830
- Cement Mortar ZM 25kg
- Adhesive Mortar BK 25kg
- Adhesive and Reinforcing Mortar BAK Grey 25kg
- Concrete BH 35 25kg
- Concrete Clone BE 40kg
- Cement Mortar ZM 40kg
- Floor Levelling Compound BAM 25kg
- Lime-Cement Mortar 25kg PM Super
- Cement Mortar ZM 12.5kg
- Mortar Weber M100/600 25kg
- Mortar Furnace Mix 5kg Heat-Resistant 750C
- Mortar Stove Mix 25kg Heat-resistant 750C
This product is available at Zum.lv - the largest online store in Latvia.
View product on site