Aurlak M Parquet Lacquer 0.9L Semi-Matte

<p>Fast-drying alkyd-urethane lacquer designed for lacquering parquet floors in interior works. It forms a hard glossy film with high water and wear resistance.</p><u>Properties:</u><ul><li>Semi-matte</li><li>Product intended for interior use</li><li>Solvent can be used for thinning and tool cleaning</li><li>Brush application permitted</li><li>Roller application permitted</li><li>Drying time 3 h</li><li>Coverage 8-12 m²/l</li><li>Volume 0.9 l</li></ul><u>Usage:</u><p>Before use, stir the lacquer. If necessary, thin to working viscosity with white spirit or VAITSOL solvent. Use the same solvents for cleaning work tools. Apply the lacquer to clean dry wooden surfaces with a roller or brush in 2-3 coats with a coverage (not counting losses during application) of 8-10 m²/l per coat. The air and surface temperature must be between +5°C and +30°C. Relative air humidity – no higher than 85%. When applying the first coat, thin the lacquer with 10% solvent by lacquer volume. For subsequent coats, thin the lacquer as follows: 0-5% by lacquer volume. Light sanding between coats is recommended. Sanding is mandatory if the drying time between coats exceeds 48 hours. Drying time at 20°C – 3 hours (at 10°C – 6 hours). Recommended drying time before applying the next coat – from 8 to 48 hours. The coating reaches maximum hardness after 5 days from the application of the last coat. When working with the lacquer, ensure good ventilation and use eye, face, and skin protection (goggles, gloves, etc.). The lacquer should be stored in a tightly sealed container, protected from heat.</p>

10.29 € EUR

SKU: 12588

Brand: RILAK

EAN: 4750445116137

This product is available at Zum.lv - the largest online store in Latvia.

View product on site