Floor Self-Leveling Compound NSP 25kg 3-20mm for Concrete Surfaces

Sakret NSP fast-setting, self-leveling compound for floors:<ul><li>For floor installation (3 - 20 mm)</li><li>For leveling full and partial horizontal surfaces</li><li>For concrete substrates</li><li>Suitable for use on heated floors</li><li>Cement-based</li><li>Before applying the finishing layer</li><li>For interior use</li></ul>Application:<ul><li>The substrate must be dry and firm, all cracks and voids must be filled</li><li>Clean the substrate from less durable and/or detachable layers</li><li>Absorbent surfaces must be primed with SAKRET UG primer (diluted 1:2)</li><li>Dry and highly absorbent surfaces must be primed twice</li><li>The floor compound can be used on concrete and other mineral material substrates</li><li>It is prohibited to use SAKRET NSP on gypsum or anhydrite substrates</li><li>When using SAKRET NSP on heated floors, heating must be turned off 5 days before and must not be turned on until 28 days after material application</li><li>Mix SAKRET NSP in a clean container with cold water until a homogeneous lump-free mass is formed</li><li>It is recommended to use a mixer at 600 rpm</li><li>After the maturing time (~3 min.), remix</li><li>Do not dilute material that has started to set with water, but remix with a mixer</li><li>Pour the compound onto the surface (layer thickness >3 mm) and level with a spiked roller</li><li>Floor expansion joints must not be filled with the leveling compound</li><li>When leveling substrates, cushioning material must be applied along the perimeter</li><li>When using the material for large-area floor leveling, floor expansion joint intervals must be strictly observed</li><li>Technical data refers to +20°C temperature and 50% relative air humidity. Lower temperature increases, higher temperature decreases the indicated values</li><li>During the hardening phase, protect the leveling compound from sunlight, drafts, frost and excessively high temperatures (>25°C)</li><li>Hardened compound can only be removed mechanically</li><li>Contains cement, alkaline reaction</li></ul>Technical Data:<ul><li>Strength class C25</li><li>Flexural strength class F6</li><li>Consumption 1.6 kg/m²/mm</li><li>Can be partially loaded, walked on after 4h</li><li>Can be covered with tiles after 36 h</li><li>Can be covered with parquet, linoleum, etc. after 7 days</li><li>Fire resistance class A1 (non-combustible)</li><li>Wear resistance class (according to standard LVS EN 13813) A12</li></ul>
11.99 € EUR
SKU: 223596
Brand: Sakret
EAN: 4751006560796

This product is available at Zum.lv - the largest online store in Latvia.

View product on site