Knauf Klebespachtel M Adhesive Mortar for Mineral Wool 25kg
<p>Knauf Klebespachtel M adhesive mortar for bonding and reinforcing mineral wool boards. Klebespachtel M is a universal cement-based adhesive mortar designed for bonding, reinforcing, and spackling mineral wool insulation boards. It is part of the certified facade insulation system Knauf Termo Plus M, providing high adhesion and durability.</p><u>Technical Data:</u><ul><li>Complies with standard LVS EN 998-1, GP</li><li>Grain size 0 – 0.6 mm</li><li>Compressive strength ≥ 5 N/mm² (CS III)</li><li>Flexural strength ≥ 1.5 N/mm²</li><li>Reaction to fire class A1</li><li>Thermal conductivity (λ10 dry) 0.47 W/(m·K)</li><li>Water absorption W2</li><li>Application temperature +5 °C to +30 °C</li><li>Consumption:<ul><li>Bonding ~5 kg/m²</li><li>Reinforcing ~6.5 kg/m²</li><li>Spackling ~2.6 kg/m²</li></ul></li></ul><u>Properties and Application Area:</u><ul><li>Good adhesion to various surfaces</li><li>Water vapour permeable and hydrophobic</li><li>High resistance to physical and mechanical factors</li><li>Universally applicable for interior and exterior work</li><li>Suitable as a bonding bridge on smooth concrete surfaces prior to plastering</li><li>Provides high-quality reinforcing and spackling of insulation boards</li><li>Easy to apply both by hand and mechanically</li><li>Applicable in certified insulation systems, such as Knauf Termo Plus M</li></ul><u>Instructions for Use:</u><p>The substrate must be dry, stable, and clean, free of dust, loose particles, and efflorescence. Before starting work, walls with large unevenness (>5 mm/m) must be levelled. If necessary, old concrete and plaster can be cleaned with a high-pressure water jet, then allowed to dry completely. Unstable or chalky substrates should be primed with Knauf Haftemulsion or Tiefengrund.</p><p>To prepare the mixture, pour 25 kg of Klebespachtel M into ~6.5 litres of clean water and mix with a slow-speed mixer until a homogeneous, lump-free mass is formed. After 5 minutes, remix and adjust the consistency as needed. The mortar is applied with a trowel or mechanical equipment according to the application, observing the required layer thickness. Use facade protection nets to protect surfaces during drying. Dowelling can be carried out after the mortar has hardened, usually within 1 – 3 days, depending on conditions.</p>
6.99 €
EUR
SKU: 228075
Brand: Knauf
EAN: 4750614003145
- Adhesive and Reinforcing Mortar BAK-F Anti-Frost Grey 25kg
- Adhesive Mortar for Insulation Boards Kleber PM 25kg
- Java CN71 25kg Floor Self-Leveling Compound 0.5-10mm
- Concrete Clone Weber S100 25kg
- Java CT29 25kg Mineral Filler
- Mortar for Floors RS88 25kg Fast-Setting 1-100 mm
- Floor Screed CN87 25kg Fast-Setting 10-200mm
- Self-Leveling Floor Compound 25 kg Knauf 1-40 mm Nivello140
- Adhesive for Aerated Concrete Blocks 25kg GMS Grey
- Concrete Clone Weber S100 25kg Winter
- Java CN69 25kg Floor Self-Leveling Compound 1-15mm
- Java CN75 25kg Floor Self-Leveling Compound 1-50mm
This product is available at Zum.lv - the largest online store in Latvia.
View product on site