Paint Villa Aqua A 9L Wood Facade

Name: Paint Villa Aqua A 9L Wood Facade
Brand: Vivacolor
SKU: 12441
Price: 80.79 EUR
Availability: InStock

Matte water-based paint Villa Akva A base for wood surfaces in exterior use. The paint forms a dirt and water-repellent surface. Villa Akva provides excellent color and gloss retention. When the product is used according to instructions, protection against weather conditions for up to 15 years is ensured.Technical Data:<ul><li>Recommended use for exterior work</li><li>Consumption 4 - 9 m²/l</li><li>Sheen matte</li><li>Application method brush, sprayer</li><li>Application conditions - the surface to be painted must be clean and dry (relative moisture content of wood below 20%), air temperature above +5°C and relative air humidity during painting and drying – below 80%, avoid excessively high temperatures during painting</li><li>Drying time (23°C, relative air humidity 50%) - touch dry after 1 h, recoatable after 4 h</li><li>Binder acrylate</li><li>Volume 9 l</li></ul>Surface Preparation:Unpainted surfaces: Clean the surface of dust and dirt. Wash dirty and greasy surfaces with Special Clean detergent, rinse with water and allow to dry. Wash mouldy surfaces with Tikkurila Homeenpoisto solution according to instructions, rinse with water and allow to dry. Treat metal parts, such as nail heads, with a suitable anti-corrosion primer. Clean resin from knot areas. Prime the surface as early as possible after manufacturing with Villa Lasur Akva or Villa Protekt. Continue work by applying Villa Primer and 1 coat of Villa Akva, or 2 coats of Villa Akva without Villa Primer. Carefully treat the ends of the product.Previously painted surfaces: Clean the surface of dust and dirt. Wash dirty and greasy surfaces with Special Clean detergent, rinse with water and allow to dry. Wash mouldy surfaces with Tikkurila Homeenpoisto solution according to instructions, rinse with water and allow to dry. Remove peeling paint from previously painted wood surfaces with a scraper and wipe the surface clean with a wire brush. Treat surfaces previously painted with acrylic paints with Villa Akva in 1 - 2 coats depending on the condition of the surface and color differences. If the old surface is worn or painted with oil-based paints, prime the old painted surface with Villa Primer and the old acrylic painted surface with Villa Akva. Paint the surface with Villa Akva paint. Pay particular attention to the ends and edges of the wood product.Industrially primed surfaces: Apply Villa Akva in 1 - 2 coats. Industrially primed surfaces that have been exposed to weather conditions for more than 10 months must be treated with Villa Primer and repainted with Villa Akva in 1 - 2 coats. Pay particular attention to the ends and edges of the wood product.Application:Before use, stir the paint thoroughly and, if necessary, thin with water. Apply with a brush or high-pressure sprayer. Carefully treat the ends of the product. To avoid color differences, mix a sufficient amount of paint for the entire surface in one container. Attention! To protect from product splashes, plants and surfaces not intended for treatment must be covered. Wood contains resins and other coloring secretions, especially at knot areas. Under the influence of moisture and temperature, these can cause yellowing or resin bleeding through the painted surface. The use of a primer (Villa Primer) reduces resin bleeding through the paint film.

80.79 € EUR 80.79 € EUR

SKU: 12441

Brand: Vivacolor

EAN: 4740193234054

This product is available at Zum.lv - the largest online store in Latvia.

View product on site