Sealant 290ml Painters Silicone White

Name: Sealant 290ml Painters Silicone White
Brand: Penosil
SKU: 11735
Price: 3.19 EUR
Availability: InStock

Elastically plastic white acrylic sealant for filling gaps and cracks in moving joints.Advantages:<ul><li>For interior and exterior use</li><li>High movement capability (± 12.5%)</li><li>Bright white, exceptionally smooth surface</li><li>Low odour</li><li>Paintable</li><li>Good adhesion to most building materials</li><li>Easy to use</li><li>Moisture resistant after 5 hours from application</li><li>Resistant to UV rays</li></ul>Application:<ul><li>Sealing joints where high movement capability is required</li><li>Filling joints between window or door frames and walls</li><li>Filling connection joints between walls and ceilings</li><li>Filling joints between plasterboard panels and screw holes</li><li>Repairing surface defects before painting</li></ul>Adhesion:<ul><li>Concrete</li><li>Plaster</li><li>Plasterboard</li><li>Masonry</li><li>Wood</li><li>Construction boards</li><li>Ceramics</li><li>Glass</li></ul>Usage:Cut off the top threaded part of the cartridge and screw on the special nozzle-applicator for applying the sealant. The nozzle should be cut to create a sufficiently sized opening for dispensing. Insert the cartridge with the applicator into the gun and fill the applicator with sealant by pressing the gun trigger (lever) several times.Apply the sealant into the joint by repeatedly and evenly pressing the gun trigger while smoothly drawing the applicator along the joint. After applying the sealant, smooth it out with a rubber spatula. Remove excess sealant.Maximum joint surface 30 × 20 mm; for larger joints, the joints must be filled in two layers, allowing the first layer to fully dry (curing rate 2.5 - 3 mm per day). Can be painted after full curing, the duration of which depends on the joint dimensions (curing rate 2.5 - 3 mm per day). If painting occurs before the acrylic has fully cured, cracks may appear in the paint.Recommendations:<ul><li>Application temperature from +5°C to +40°C</li><li>Surfaces must be clean and free from grease, oil, dust and dirt</li><li>The surface to be coated must be dry</li><li>The product cures by drying (through water evaporation). High humidity, low temperature and large joint depth can significantly delay film formation and curing.</li><li>It is strongly recommended to cover the cured sealant with a suitable paint to ensure its longevity and a colour matching the surface tone</li><li>Paintable after full curing. Curing time depends on the joint size (2.5 - 3 mm / day).</li><li>Premature painting may cause cracking of the paint</li><li>All joints must have adequate ventilation</li><li>During curing, ensure that no contaminants can settle on the surface and that mechanical load does not affect the joint surface</li><li>Do not use at temperatures below +5°C</li><li>Not suitable for use in joints or seams with movement capability exceeding 12.5%</li><li>Not suitable for use in joints that are in constant contact with water</li></ul>

3.19 € EUR

SKU: 11735

Brand: Penosil

EAN: 4743307101907

This product is available at Zum.lv - the largest online store in Latvia.

View product on site