Sealant 300ml SilAcryl Elastic 633 Sanitary

<p>Elastically plastic, siliconized acrylic water-based sealant for various sealing and filling tasks in damp and wet areas. Added fungicides protect sealed surfaces from mould formation and keep them white and clean for a long time.</p><u>Advantages</u>:<ul><li>Resistant to mould, water and ageing</li><li>Easy to use</li><li>No strong odour</li><li>Low VOC emissions</li><li>Does not sag on vertical surfaces</li><li>Permanently elastic</li><li>Easy to clean</li><li>Does not sag on vertical surfaces</li><li>Permanently elastic</li><li>Easy to clean</li></ul><u>Application</u>:<ul><li>Sealing joints in damp and wet areas</li><li>Sealing connection joints between tiled floors and walls, sinks, toilets, baths and shower cabinets</li></ul><u>Adhesion</u>:<ul><li>Concrete</li><li>Gypsum</li><li>Brick</li><li>Various tiles</li><li>Wood</li><li>PVC</li><li>Glass</li></ul><u>Instructions for use</u>:<p>Cut off the top threaded part of the cartridge and screw on the special nozzle (applicator) for applying the sealant. The nozzle should be cut to create a sufficient opening for dispensing. Insert the cartridge with the applicator into the gun and fill the applicator with sealant by pressing the gun trigger several times. Apply the sealant to the joint by repeatedly and evenly pressing the gun trigger while drawing the applicator evenly along the joint. After applying the sealant, smooth it with a rubber spatula. Remove excess sealant. Can be painted after full curing. Curing time depends on the joint size (2.5 - 3 mm/day). Premature painting may cause paint cracking. It is highly recommended to cover the cured sealant with a suitable paint to guarantee its longevity and a colour tone similar to the background surface.</p><u>Recommendations</u>:<ul><li>Application temperature from +5 °C to +40 °C. Surfaces must be clean of grease, oil, dust and dirt</li><li>The surface to be coated must be dry. The product cures by drying (through water evaporation). High humidity, low temperature and large joint depth can significantly delay skin formation and curing</li><li>It is strongly recommended to coat the cured sealant with a suitable paint to guarantee its longevity and a colour matching the surface tone</li><li>Paintable after full curing. Curing time depends on the joint size (2.5-3 mm/day). Premature painting may cause paint cracking</li><li>All joints must be provided with adequate ventilation</li><li>During curing, ensure that no contaminants can settle on the surface and that mechanical load does not affect the joint surface</li><li>Do not use at temperatures below +5 °C</li><li>Not suitable for use in joints or seams with movement capability above 12.5%</li><li>Not suitable for use in joints in permanent contact with water</li></ul>

2.99 € EUR

SKU: 37429

Brand: Penosil

EAN: 4743307161505

This product is available at Zum.lv - the largest online store in Latvia.

View product on site