Elvi Facade Filler 8kg

<p>Moisture-resistant filler compound on acrylic latex base, suitable for exterior and interior (especially rooms with elevated humidity) finishing work. Designed for filling cracks, recesses and final levelling of surfaces before painting. Good adhesion to various surfaces – concrete, lightweight concrete, plaster, plasterboard, bricks, wood (wood moisture not exceeding 10%). Easy to apply and sands well.</p><u>Surface preparation:</u><p>Non-durable surface layers must be removed; porous and highly moisture-absorbent surfaces should be primed with ELVI TPB–5, A–05 or another priming agent before filling.</p><u>Surface treatment:</u><p>Before use, thoroughly mix the filler compound. Apply the filler compound with a spatula onto a clean, dry, solid surface. Apply the next layer of filler only after the previous layer has fully dried and the sanded areas have been primed. After the layer has dried, sand the filled surface smooth with fine-grit sandpaper.</p><u>Technical data:</u><ul><li>Solvent: water</li><li>Colour: white</li><li>Maximum particle size: 80 μm</li><li>Density: 1.80 g/cm³</li><li>Maximum layer thickness for a single application: 4 mm</li><li>Layer drying time at +10°C to +25°C and relative humidity of 75%: from 1.5 to 20 hours (depending on layer thickness)</li><li>Recommended air and surface temperature: from +10°C to +25°C</li><li>Consumption for a 1 mm layer with full surface filling: approximately 1 l/m²</li><li>Packaging: 8 kg</li></ul>

17.59 € EUR

SKU: 15054

Brand: Elvi

EAN: 4751001650416

This product is available at Zum.lv - the largest online store in Latvia.

View product on site