Non-Shrink Mortar RM 25kg

Sakret RM non-shrink mortar:<ul><li>According to standard EN 1504-3 class R4</li><li>For installation of reinforced concrete elements</li><li>For filling and repair of vertical and horizontal inter-panel joints during building operation</li><li>For anchoring bolts of equipment and building structures</li><li>For outdoor and indoor work</li><li>Layer thickness from 5 mm to 100 mm (in case of formwork or anchor bolt fastening)</li><li>Can be applied by hand or mechanically</li></ul>Usage:<ul><li>The surface must be clean and mechanically sound</li><li>Clean the surface of less stable and/or detachable layers</li><li>It is recommended to prime the surface before treatment with universal primer SAKRET UG (diluted 1:3)</li><li>For anti-corrosion treatment of metal reinforcement or elements and to improve adhesion, use anti-corrosion contact mortar SAKRET CEM Prim</li><li>In repair areas, use SAKRET CEM Prim as an adhesion improver</li><li>Mix the mortar in a clean container with cold water until a homogeneous mass without lumps is formed</li><li>It is recommended to use a mixer at 600 rpm for mixing</li><li>After the maturation time (~3 min.), mix again</li><li>Prepare only as much material as can be used within 15 minutes</li><li>Required water quantity approx. 0.11 litres/kg</li><li>Apply the ready mix to the surface with a spatula or metal float and level</li><li>Once the mortar has started to set, no more water may be added</li><li>Protect fresh mortar from rain and excessively rapid drying</li><li>Contains soluble hexavalent chromium Cr (VI) ions ≤0.0002%</li></ul>Technical data:<ul><li>Compressive strength after 1 day ≥25 N/mm², after 7 days ≥40 N/mm², after 28 days ≥50 N/mm²</li><li>Flexural strength after 28 days ≥7 N/mm²</li><li>Expansion after 28 days +0.006%</li></ul>
11.99 € EUR
SKU: 223584
Brand: Sakret
EAN: 4751006561052

This product is available at Zum.lv - the largest online store in Latvia.

View product on site