Sealant 300ml All Weather 919

Name: Sealant 300ml All Weather 919
Brand: Penosil
SKU: 37414
Price: 3.69 EUR
Availability: InStock

Solvent-based, water and mould resistant sealant on a synthetic rubber base, with good adhesion to most materials.Advantages:<ul><li>Wide range of applications for interior and exterior work</li><li>High elasticity</li><li>Paintable</li><li>Resistant to mould, UV rays and weathering</li><li>Silicone-free (synthetic rubber base)</li><li>Can be worked even after curing</li><li>Thixotropic</li><li>Transparent and unnoticeable</li><li>Can be used at various temperatures (from -5 °C to + 40 °C)</li><li>Can be used on copper surfaces and in contact with bitumen</li><li>Adhesion to wet and slightly greasy surfaces, however, for better adhesion, porous surfaces must be dry</li><li>Long shelf life</li></ul>Applications:<ul><li>Roof repair, including on bitumen surfaces</li><li>Quick gap filling even on wet and greasy surfaces</li><li>Sealing and repair of rainwater systems</li></ul>Adhesion:<ul><li>Brick</li><li>Concrete</li><li>Mortar</li><li>Wood</li><li>Metal</li><li>Glass</li><li>Plastics</li><li>Bitumen</li></ul>Application:Cut off the top threaded part of the cartridge and screw on the special nozzle-applicator for applying the sealant. The nozzle should be cut at a 45° angle to create a sufficient opening for dispensing. Insert the cartridge with the applicator into the gun and fill the applicator with sealant by pressing the trigger mechanism several times. Apply the sealant into the joint by repeatedly and evenly pressing the gun trigger while smoothly pulling the applicator along the joint. After applying the sealant, smooth it with a rubber spatula. Remove excess sealant.All joints must be adequately ventilated. During curing, ensure that no contaminants can settle on the surface and that mechanical load does not affect the joint surface. As a result of continuous contact with water, joints may turn yellow, but this does not affect the quality of the material. Joint edges may be taped, however the tape must be removed immediately after completing the work or after the sealant has cured.After curing, the PENOSIL Premium All Weather surface will be slightly tacky. The cured surface can be painted with paints and varnishes available in stores. When painting an uncured surface, curing of the sealant may slow down if paints without solvents are used.Recommendations:<ul><li>Keep at room temperature for 24 hours before use</li><li>Application temperature from -5°C to + 40°C</li><li>Surfaces must be clean from dust and dirt</li><li>Porous surfaces must be dry and free of oil</li></ul>

3.69 € EUR

SKU: 37414

Brand: Penosil

EAN: 4743307160799

This product is available at Zum.lv - the largest online store in Latvia.

View product on site