Wear-resistant yacht Marine varnish 40 2.4l semi-gloss

<p>Wear-resistant urethane alkyd varnish for lacquering boat parts. Suitable for lacquering indoor and outdoor wooden surfaces. Used for lacquering wooden boats, yachts, above-water parts of boats, cabins, and decks. Also suitable for window frames, doors, stairs, and other wooden surfaces and furniture details. Can be used on both new and previously varnished surfaces. Not suitable for floors and sauna spaces.</p><u>Properties:</u><ul><li>Easy to apply to surfaces</li><li>Contains UV filters</li><li>Forms a semi-matte coating that preserves and highlights the natural beauty of the wood surface</li><li>The varnished surface is resistant to wear, water, and household chemicals</li><li>Protects the surface from dirt and scratches</li><li>Contains low aromatic white spirit</li><li>Maximum VOC content in ready-to-use paint &lt;500 g/l</li><li>Color - colorless (tintable in the Eskarocolor system)</li><li>Coverage 8 - 12 m2/l</li><li>Package volume 2.4 l</li></ul><u>Application:</u><p>The surface to be varnished must be cleaned of old peeling material, wax, silicone, grease, oil, and dust. Previously varnished glossy surfaces must be sanded to a matte finish and the sanding dust thoroughly removed. The moisture content of the wood being varnished must not exceed 20%. Recommended surface and air temperature: +5 to +25°C, relative humidity 40 - 75%. New dense wood surfaces are recommended to be cleaned with white spirit, rough surfaces – moistened with water, dried, and sanded. In the case of previously varnished surfaces, check compatibility with the old varnish on a small area. Very dirty surfaces should be washed with EasyClean; for mold removal use Biotol E and then rinse the surface. Previous coatings made with water-based varnish require complete removal. Outdoor wooden surfaces must be pre-treated with Aura Biostop impregnating primer and primed with diluted varnish.</p><p>Before use, mix the varnish thoroughly and stir occasionally during application as well. Apply the varnish with a brush, spatula, or sprayer. It is recommended to apply 2 – 3 coats along the wood grain, from edge to edge, choosing the direction of work in the direction of light. Each subsequent coat must be applied after the previous one has fully dried. Before applying the second coat, lightly sand the surface with fine sandpaper (approx. 150) and remove the dust. Use tinted varnish only for the first coat, having first tested the tint on a small area, as the varnish may change shade on different types of wood. For heavily used varnished surfaces, it is recommended to choose strong wood, avoiding easily deformable species. When varnishing, ensure uniform humidity, ventilation, and stable temperature. Avoid drafts and reduce ventilation in dry, hot spaces to prevent uneven drying or film defects.</p><p>Drying time - 4 hours, recoating after 24 hours at 23°C and 50% relative humidity. At lower temperatures and higher humidity, drying time increases. The varnished surface achieves wear resistance after 2 weeks. For surface washing, use water and, if necessary, neutral or mildly alkaline (pH 6 - 8) detergents and a soft cloth or sponge. Do not use organic solvents, abrasive cleaning agents, or rough sponges or brushes.</p><p>Work tools - brush, paint roller, varnish spatula. Use high-quality tools. A paint roller, even a new one, must be cleaned of loose roller fibers before use. Work tools must be clean, dry, and free of loose parts (brush or roller fibers). Clean tools immediately after varnishing with white spirit.</p>

29.59 € EUR

SKU: 209698

Brand: Eskaro

EAN: 4740381011306

This product is available at Zum.lv - the largest online store in Latvia.

View product on site