Acrylic 280ml D Line

Name: Acrylic 280ml D Line
Brand: D Line
SKU: 11417
Price: 1.39 EUR
Availability: InStock

Paintable acrylic sealant for filling gaps and cracks before painting.Advantages:<ul><li>Easy to use</li><li>Low odour level</li><li>Forms a plastic bond</li><li>Does not deteriorate or spread in the joint</li><li>Paintable</li><li>Adheres well to most building materials</li><li>UV resistant</li></ul>Application:<ul><li>Filling wall cracks and joints</li><li>Filling joints between window or door frames and walls</li><li>Filling joints between plasterboard panels and screw holes</li><li>Repairing surface defects before painting</li></ul>Adhesion:<ul><li>Concrete</li><li>Plaster</li><li>Plasterboard</li><li>Brick</li><li>Wood</li><li>Construction boards</li><li>PVC</li></ul>Instructions for use:Cut off the top threaded part of the cartridge and screw on the special nozzle-applicator for applying acrylic. The nozzle should be cut so that a sufficient opening for dispensing is formed. Insert the cartridge with the applicator into the gun and fill the applicator with acrylic by pressing the gun trigger several times. Apply the acrylic into the joint by repeatedly and evenly pressing the gun trigger while pulling the applicator steadily along the joint. After applying the acrylic, smooth it with a rubber spatula. Remove excess acrylic.Recommendations:<ul><li>Application temperature from +5°C to +40°C. Surfaces must be clean and free from grease, oil, dust and dirt.</li><li>The surface to be coated must be dry. The product cures by drying (through water evaporation). High humidity, low temperature and large joint depth can significantly delay film formation and curing.</li><li>It is strongly recommended to coat the cured sealant with a suitable paint to guarantee its longevity and a colour similar to the surface tone.</li><li>Paintable after full curing. Curing time depends on the size of the joint (2.5 - 3 mm / day). Premature painting may cause paint cracking.</li><li>All joints must be adequately ventilated.</li><li>During curing, ensure that no contaminants can settle on the surface and that mechanical load does not affect the joint surface.</li><li>Do not use at temperatures below +5°C.</li><li>Not suitable for joints with significant movement (more than 8% of joint width).</li><li>Not suitable for joints in permanent contact with water.</li><li>Not suitable for joints with bitumen surfaces.</li><li>Poor adhesion to glass and some plastics.</li><li>May cause corrosion on exposed metal surfaces.</li><li>Once cured, cannot be sanded like a filler.</li> </ul>

1.69 € EUR 1.39 € EUR (-18%)

SKU: 11417

Brand: D Line

EAN: 4750959090350

This product is available at Zum.lv - the largest online store in Latvia.

View product on site