Aquastop Primer Concentrate 1L

<p>Water-soluble primer concentrate for porous and absorbent surfaces for interior use. Use only diluted for priming porous and moisture-sensitive surfaces before painting with water-soluble paints, tiling, wallpapering, and plastering. Suitable for priming living spaces, offices, production rooms, bathrooms, hallways, kitchens, etc.</p><u>Properties:</u><ul><li>Use only in diluted form</li><li>Thanks to the high dry matter content, retains all properties even at the maximum allowable 1:5 dilution</li><li>One coat is sufficient</li><li>Protects the surface from moisture</li><li>Equalizes the surface absorption capacity, ensures excellent adhesion with finishing materials and creates a uniform absorption surface for painting or wallpapering</li><li>Reduces paint consumption</li><li>Dries quickly</li><li>Almost odorless</li><li>Maximum VOC content in product &lt;30 g/l</li><li>Color - light blue, transparent after drying</li><li>Consumption depending on the surface absorption capacity:<ul><li>Surfaces with low absorption (stone, plasterboard, etc.) 10 m²/l</li><li>Surfaces with medium absorption (plaster, concrete, brick, fibreboard and chipboard, etc.) 6 - 8 m²/l</li><li>Highly absorbent surfaces (aerated concrete, etc.) 3 - 4 m²/l</li></ul></li><li>Package volume 1 l</li></ul><u>Suitable surfaces:</u><ul><li>Concrete</li><li>Aerated concrete</li><li>Plaster</li><li>Fillers</li><li>Cement</li><li>Brick</li><li>Plasterboard</li><li>Fibreboard</li><li>Chipboard</li></ul><u>Application:</u><p>The surface to be treated must be dry, cleaned of dust, grease, and other dirt. Previously painted surfaces should be cleaned of old peeling paint, roughened, and rinsed with water. Surfaces covered with mold or moss must be mechanically cleaned and treated with Biotol E or Biotol Spray, rinsed with water, and allowed to dry. Plastered and rendered surfaces must be fully dry before treatment.</p><p>Dilute the product with water according to the type of surface. After dilution, the resulting solution must be thoroughly mixed. The temperature of the surface and air during application must not be lower than +15°C or higher than +30°C. Apply 1 coat to the surface using a brush or roller. Highly absorbent surfaces should be primed using the "wet on wet" method until saturation. After drying, the primer must not create a glossy film on the surface.</p><p>Application tools - brush, roller. Wash tools with soap and water.</p><p>Drying time 2 - 6 hours at 20°C and 65% relative humidity. At lower temperatures and higher humidity, drying time increases. Before further treatment, wait until the surface is completely dry.</p>

6.69 € EUR 5.59 € EUR (-16%)

SKU: 209694

Brand: Eskaro

EAN: 4740381000485

This product is available at Zum.lv - the largest online store in Latvia.

View product on site