Marine Wear-Resistant Yacht Varnish 10 0.45l Matte
<p>Wear-resistant urethane alkyd varnish for finishing the waterline areas of boats. Suitable for varnishing indoor and outdoor wooden surfaces. Used for varnishing wooden boats, yachts, above-waterline boat sections, cabins, and decks. Also suitable for window frames, doors, stairs, and other wooden surfaces and furniture components. Can be used on both new and previously varnished surfaces. Not suitable for floors or sauna spaces.</p><u>Properties:</u><ul><li>Easy to apply to surfaces</li><li>Contains UV filters</li><li>Thixotropic - gel-like, convenient to use, does not drip from the brush, thins upon application, levels well</li><li>Forms a matte coating that preserves and highlights the natural beauty of the wood surface</li><li>The varnished surface is resistant to wear, water, and household chemicals</li><li>Protects the surface from dirt and scratches</li><li>Contains low aromatic white spirit</li><li>Maximum VOC content in ready-to-use paint <500 g/l</li><li>Color - clear (tintable in the Eskarocolor system)</li><li>Coverage 8 - 12 m²/l</li><li>Package volume 0.45 l</li></ul><u>Application:</u><p>The surface to be varnished must be thoroughly cleaned of old varnish, wax, grease, dust, and other contaminants. Previously varnished, glossy surfaces must be sanded to a matte finish and ensure that the moisture content of the wood does not exceed 20%. The recommended surface temperature is +5 to +25°C, relative humidity 40 - 75%. It is not recommended to varnish in direct sunlight, in a draught, or at elevated temperatures. Particularly dirty surfaces should be washed with EasyClean; in case of mould, use Biotol E. Surfaces must be allowed to dry before varnishing. If the surface has been varnished with a water-based varnish, completely remove the old varnish. Previously varnished surfaces do not require priming; bare wood can be primed with a mixture of varnish and white spirit (5:1).</p><p>Stir the varnish thoroughly and apply with a brush, spatula, or spray along the wood grain, in a continuous coat from edge to edge. Apply 2 - 3 coats, observing the drying time between coats. Before applying the second coat, lightly sand the surface and remove dust. Carry out a test varnish application to check the colour tone. During varnishing, ensure uniform humidity and ventilation, avoiding draughts to prevent defects. The final surface colour will depend on the type of wood and the number of varnish coats.</p><p>Drying time - 4 hours, recoating after 24 hours at 23°C and 50% relative humidity. At lower temperatures and higher humidity, drying time increases. The varnished surface achieves wear resistance after 2 weeks. To clean the surface, use water and, if necessary, neutral or mildly alkaline (pH 6 - 8) cleaning agents and a soft cloth or sponge. Do not use organic solvents, abrasive cleaning agents, or rough sponges or brushes.</p><p>Work tools - brush, varnish roller, varnish spatula. Use high-quality tools. A varnish roller, even a new one, must be cleaned of loose roller fibres before use. Work tools must be clean, dry, and free of loose parts (brush or roller fibres). Clean tools immediately after varnishing with white spirit.</p>
6.49 €
EUR
SKU: 209695
Brand: Eskaro
EAN: 4740381020568
- Wear-resistant yacht Marine varnish 40 2.4l semi-gloss
- Water-Based Wood Floor Varnish Parketilakk WE 1L
- Wear-Resistant Yacht Marine Varnish 40 0.45l Semi-Gloss
- Water-Based Wood Floor Lacquer Parketilakk WE 3l
- Wood Surface Protection for Saunas Sauna Oil 0.4l
- Marine Varnish 90 Wear-Resistant Yacht Lacquer 0.45l Glossy
- Water-Based Wood Oil Wood Decor Palisander 0.9L
- Water-Based Wood Oil Wood Decor Palisander 9L
- Water-Based Wood Oil Wood Decor Grey 2.7L
- Water-Based Wood Oil Wood Decor Brown 9L
- Water-Based Wood Oil Wood Decor Rosewood 2.7L
- Water-Based Wood Oil Wood Decor Grey 0.9L
This product is available at Zum.lv - the largest online store in Latvia.
View product on site