Primer Concentrate 1:3 Poorbetooni, 10L

<p>Special primer concentrate for treating porous substrates before applying gypsum plasters.</p><u>Properties:</u><ul><li>Dilute with room temperature water 1:2 - 1:3</li><li>Regulates surface absorption capacity, promoting uniform adhesion of plaster mixtures</li><li>After drying, forms a strong and moisture-resistant surface</li><li>Does not reduce the substrate's vapour permeability</li><li>Increases surface adhesion properties</li><li>For interior and exterior use</li><li>Maximum VOC content in product <30 g/l</li><li>Colour - red</li><li>Consumption 0.1 l/m² depending on the porosity of the treated surface</li></ul><u>Suitable surfaces:</u><ul><li>Lightweight concrete</li><li>Porous blocks (gas silicate, aerated concrete and foam concrete blocks)</li><li>Concrete with porous and organic binders (ceramic and polystyrene concrete, etc.)</li><li>Cement blocks</li><li>Bricks and other absorbent surfaces, such as gypsum and cement-lime plasters</li></ul><u>Application:</u><p>The treated surface must be firm, dry and clean. Before priming lightweight concrete blocks, remove dust from the surface. Remove previously painted surfaces. Old plastered surfaces must have sufficient load-bearing capacity.</p><p>Before use, stir the primer and dilute with water 1:2 - 1:3 depending on the porosity of the substrate. Do not use undiluted. Do not dilute with ice-cold water. Apply to the surface with a brush or roller. Do not allow to run and do not leave untreated areas. Air and substrate temperature must be +5 to +25°С. The treated surface is ready for further treatment after 6 - 12 hours.</p><p>Work tools - brush, roller. Wash tools with soap and water.</p><p>Drying time 6 - 12 hours at 20ºC and 65% relative humidity. At lower temperatures and higher humidity, drying time increases.</p>

46.59 € EUR 38.79 € EUR (-17%)

SKU: 209687

Brand: Eskaro

EAN: 4740381014574

This product is available at Zum.lv - the largest online store in Latvia.

View product on site